Posts: 7,421
Threads: 1
Joined: Sep 2005
I am remodeling the guest bathroom. There is a small window above the bathtub at the far end from the shower head.
I am planning on replacing the painted wood sill with a sill made from 4" wide x 3/4" thick marble. I will install the sill and extend the width to make a small shelf for shampoo, etc.
Question: What should I use to adhere the marble to the wall?
I will tile after installing the sill so the joint will be hidden. One end of the shelf will be in a corner giving support to the short end.
I was thinking thinset or epoxy but I am open to other suggestions.
No animals were injured or killed in the production of this post.
Posts: 36,538
Threads: 3
Joined: Nov 2004
Location: RTP, NC
I would screw cement backer board to the framing around the window and then thinset the marble to that. Depending on how far the marble extends out from the wall you may need corbels or brackets attached to the wall to support it.
Posts: 7,421
Threads: 1
Joined: Sep 2005
Part of the marble will tuck under the window.
I was planning on a cement backer board. There would have to be a relief cut in the backer board for the sill to tuck under the window. The current sill is nailed in place. Obviously I would not nail in the marble sill.
I could use thin set to attache to the underside of the window frame as well as to attach the shelf section to the wall.
No animals were injured or killed in the production of this post.
Posts: 12,878
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
We all call them sills, but it's not. The sill is outside. The inside piece is called the stool.
John
Posts: 2,772
Threads: 0
Joined: Oct 2012
Location: W. of Rainier, E. of Orcas
Won't marble at a window sweat more than other materials?
Posts: 7,421
Threads: 1
Joined: Sep 2005
11-11-2019, 12:37 PM
(This post was last modified: 11-11-2019, 12:37 PM by Cooler.)
(11-11-2019, 11:22 AM)hbmcc Wrote: Won't marble at a window sweat more than other materials?
I don't know. I had not given it any thought. I had seen a home remodel show where they replaced all the sills (I mean "stools"
) for all the windows in the house. They did not mention any issues with sweating.
Marble will certainly conduct more heat/cold than wood. A steamy shower will probably see quite a bid of condensation, but probably no more than would appear on the glass of the window itself.
No animals were injured or killed in the production of this post.
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
(11-11-2019, 12:37 PM)Cooler Wrote: I don't know. I had not given it any thought. I had seen a home remodel show where they replaced all the sills (I mean "stools"
) for all the windows in the house. They did not mention any issues with sweating.
Marble will certainly conduct more heat/cold than wood. A steamy shower will probably see quite a bid of condensation, but probably no more than would appear on the glass of the window itself.
Most of my relatives live in Detroit and most every house I have been in there built from say the 70s on all had marble window sill ( no one calls them stools anymore).
As for sweating I dunnow but it doesn't matter in a bathroom as everything is going to be masonry and if something sweats it all will and it all needs to be built water tight anyway as it's a bathroom.
Sealing around the sill etc should be done the same way you are doing your tile base. If you are using cement board and redgard as your water proofer use it around the window. But using Kerdi would be easier though. Then just set your sill like a big piece of tile with a slope to the inside.
If that area isn't a wet area just use construction adhesive to stick it down.
Posts: 162
Threads: 1
Joined: Sep 2017
you could use corian, or PVC board.
Posts: 12,878
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(11-11-2019, 02:04 PM)Robert Adams Wrote: Most of my relatives live in Detroit and most every house I have been in there built from say the 70s on all had marble window sill ( no one calls them stools anymore).
As for sweating I dunnow but it doesn't matter in a bathroom as everything is going to be masonry and if something sweats it all will and it all needs to be built water tight anyway as it's a bathroom.
Sealing around the sill etc should be done the same way you are doing your tile base. If you are using cement board and redgard as your water proofer use it around the window. But using Kerdi would be easier though. Then just set your sill like a big piece of tile with a slope to the inside.
If that area isn't a wet area just use construction adhesive to stick it down.
People say and even write "Your welcome." these days, too. Just because we all know what it means doesn't make it correct.
John
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
(11-11-2019, 04:16 PM)jteneyck Wrote: People say and even write "Your welcome." these days, too. Just because we all know what it means doesn't make it correct.
John
It's like calling all skid steers bobcats or the one that annoys me is every time there is something on the news about an airport they refer to the tarmac.... There is no such beast there is the runway, taxiways the ramp etc there is nothing called a tarmac.
But I do agree with you and I nitpick about allot of other stuff that doesn't get called by it's proper term myself. It's a proper descriptive term for something not something or a word that can change as the language changes.
