I have a small electric heater in my shop that has a approx. 8" fan driven by a small 120v motor; one of those small (prob 1/8 hp) open units (no case around it). The motor is one I salvaged from a home gas furnace. It had a squirrel cage fan on it and it was for assisting exhaust of flue gasses; somewhat like a bathroom exhaust fan. As mounted in the heater, it rotates faster than I would like and blows air over the heating coils too fast. I don't know the actual rpm. Would this adequately and safely slow it down?
|
Motor Speed Reduction
|
11-14-2019, 06:07 PM
I don't see why it wouldn't work. I was going to suggest a wall mounted light/fan dimmer.
Steve
Mo. I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24 The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints WaterlooMark 02/9/2020 
11-14-2019, 06:25 PM
(11-14-2019, 06:07 PM)Stwood_ Wrote: I don't see why it wouldn't work. I was going to suggest a wall mounted light/fan dimmer. I did a little web searching before posting and found some cautions about using a dimmer. The caution regarded over heating of both motor and dimmer. However, I think they were referring to larger motors. I don't know if it matters or not. Thanks
11-14-2019, 06:48 PM
I use a normal wall dimmer on a 4' (helicoptor size
 ) ceiling fan in the shop. It's been hooked up since 2007.
Steve
Mo. I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24 The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints WaterlooMark 02/9/2020
11-14-2019, 07:44 PM
(11-14-2019, 06:48 PM)Stwood_ Wrote: I use a normal wall dimmer on a 4' (helicoptor size I know what you are talking about. I only know what I've read. Apparently, ceiling fan motors are specifically wired to use the dimmers. Not all motors are. Thanks
11-14-2019, 11:36 PM
Universal motors, and ac/dc motors can be controlled with a dimmer or rheostat. DC motors with a controller.
11-15-2019, 08:22 AM
(11-14-2019, 03:35 PM)Willyou Wrote: I have a small electric heater in my shop that has a approx. 8" fan driven by a small 120v motor; one of those small (prob 1/8 hp) open units (no case around it). The motor is one I salvaged from a home gas furnace. It had a squirrel cage fan on it and it was for assisting exhaust of flue gasses; somewhat like a bathroom exhaust fan. As mounted in the heater, it rotates faster than I would like and blows air over the heating coils too fast. I don't know the actual rpm. Would this adequately and safely slow it down? Can you just restrict the air flow and not worry about the motor speed ? Restricting the air flow on a centrifugal blower will reduce the motors current not increase it. Roly
11-15-2019, 10:50 AM
I'm with Roly on this one. Restrict the supply to get what you want.
I don't think that controller is going to do what you want. (11-15-2019, 10:50 AM)daddo Wrote: I'm with Roly on this one. Restrict the supply to get what you want. Sorry. I should have been more clear. The motor no longer has the centrifugal (squirrel cage) blower. It now has an approx. 8" dia axil fan mounted to it. Given the overall configuration of the heater box, I could probably restrict the outflow with a grill of some sort. A controller, if it works, will also quiet it down somewhat which would be a nice additional benefit. Lacking that, I'll do some experimenting with some grill work. This is the (or similar) motor I'm asking about: https://www.supplyhouse.com/Fasco-A200-1...Motor-115V
11-15-2019, 06:24 PM
With all this effort, why don't you just purchase a heater with a blower?
|
|
|
Users browsing this thread: 3 Guest(s)