I finally upgraded my old Craftsman to a Shop Fox model W1686. Sturdy, 1/4" to 4" spindles, 1hp motor, and a 25 1/4" x 25 1/4" top that tilts 45 deg front & ~20 deg back. The dust collection wasn't that great, but I modified it a bit to bring it up to acceptable standards.
Found a helluva deal for it on Ebay...
Dave
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Still looking, November issue of WOOD magazine rates the Rigid EB4424 combo belt/spindle model as its best tool value and the Rikon 50-300 as its top tool. Anyone here have insight on either model?
Jim
There is a good chance
Broccoli doesn’t like you either.
I saw recently that a company makes a portable one like the former "porter cable" unit. If you install it in a table you can have a two in one. I have the p c and a benchtop (Jet), and the portable unit is pretty handy for large items.
(11-16-2019, 08:05 PM)stoppy Wrote: Still looking, November issue of WOOD magazine rates the Rigid EB4424 combo belt/spindle model as its best tool value and the Rikon 50-300 as its top tool. Anyone here have insight on either model?
A number of people here have the Ridgid, including me.
Reality is that which, when you stop believing in it, doesn't go away. - Philip K. Dick
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
