Posts: 16,609
Threads: 2
Joined: Oct 1999
Time to buy a new tablesaw blade for my 3 HP cabinet saw. Looking for general purpose for both ripping and crosscutting. I know that Forest Woodworker is probably top-of-the-heap but I'm not sure I want to spend that much. Just read a couple of reviews on the Freud Diablo which were positive. It's a combo blade, thin kerf. Haven't used a thin kerf blade in quite a while.
Recommendations from personal experience would be appreciated.
Thanks,
Doug
Posts: 7,008
Threads: 0
Joined: Aug 2004
Location: Perth, Australia
Doug, I guess it will come down to what you want to spend. I have dedicated rip and crosscut blades by Leitz, and prefer to use a combination blade from Leuco. The performance of all is top notch, but the prices are as well.
.. on a train to Prague
Derek
Posts: 8,397
Threads: 1
Joined: Mar 2000
12-27-2019, 07:22 AM
(This post was last modified: 12-27-2019, 07:23 AM by R Clark.)
Freud is my go-to brand for tablesaw blades. I usually keep a 50-tooth thin-kerf combo blade installed most of the time, only changing out for dado operations (a Freud SD508) or a significant instance of ripping (Freud's 30-tooth Glue line rip blade). I'm not hesitant at all to use that combo blade for ripping operations and it does a nice crosscut. The kerf on my big sled is sized for that thin kerf blade.
I (very briefly) considered getting a Forrest Woodworker II, but I don't think I'll ever see the benefit from spending over twice as much for a blade.
I find that the Freud blades sharpen and hold edges pretty well. And if I lose one to an "oops" on my Sawstop, as has happened once over the past eight years, then I'm not out a great deal of money for a replacement.
As for the Diablo versus their standard line, I can't really talk to that. I don't know the real difference there.
Posts: 21,884
Threads: 0
Joined: Oct 2003
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 1,618
Threads: 0
Joined: Feb 2010
Location: Coast of Maine
Doug,
I have a Freud LU84R011 50t full kerf combo and a WWll sharpened by Forrest that I use on my SS. I think the Freud gives a cleaner cut than the WWll for a little over half the $. It is my go to for clean cuts. Full kerf blades make math easier (IMHO) when figuring the cut width in multiple cuts.
g
I've only had one...in dog beers.
"You can see the stars and still not see the light"
The Eagles: Already Gone
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I wouldn't suggest a thin kerf for your saw, but if you insist make sure the splitter or riving knife will work with a TK.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 8,397
Threads: 1
Joined: Mar 2000
The riving knife on my SS is not really sized for a thin kerf blade. It works, but at its thickest point, the RK is slightly thicker than the thin kerf blade.
Posts: 2,726
Threads: 0
Joined: Dec 2005
Hard to beat the Freud Fusion: its on my saw 99% of the time.
![[Image: 611Bz0eU%2B-L._AC_SL1080_.jpg]](https://images-na.ssl-images-amazon.com/images/I/611Bz0eU%2B-L._AC_SL1080_.jpg)
Posts: 901
Threads: 0
Joined: Jul 2006
Location: Fripp Island, SC
I agree with Philip 1231, It is hard to beat the Freud Fusion as a general purpose table saw blade. Any time I have a series of rips and cross cuts, it is my go to blade. Otherwise, I like Freud blades, rip, cross cut and plywood and melamine.
Posts: 6,179
Threads: 0
Joined: Dec 2002
Location: Bothell, WA
I have a few different blades for my saw; I have a Forrest WWII standard kerf blade, a 50T freud crosscut and 24T Freud glue line rip. They all are excellent blades. The WWII is on the saw most of the time.
I also wouldn't recommend a thin kerf. For me they are not stiff enough for thick or dense woods like African blackwood.
Cellulose runs through my veins!
