|
ROS-shop vac hose?
|
02-09-2020, 05:21 PM
I recently discovered how well my shop vac removes dust from my ROS. It's great! But the hose is awkward, stiff, and cumbersome. Do you guys have a suggestion for a different hose?
Semper fi,
Brad 
02-09-2020, 05:32 PM
I've been using this Rockler hose
https://www.rockler.com/dust-right-flexi...expandable It's very flexible and has adapters to fit my band saw, Festool equiptment and my Ridgid sander when I still had it. Cliff
‘The problem with the world is that intelligent people are full of doubts, while the stupid ones are full of confidence
Charles Bukowski 
I use the kit package 1-1/2" hose from Mr. Nozzle
https://smile.amazon.com/s?k=Mr+Nozzle&ref=nb_sb_noss
Steve
Mo. I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24 The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints WaterlooMark 02/9/2020 
02-09-2020, 07:17 PM
I use this one, https://www.centralvacuumstores.com/cent...w20ft-hose and it's very flexible. I also like the added length which allows me to leave the shop vac where it sits. I can't remember if this is where I bought mine but if it is it really went up in price, I paid around $39 IIRC.
02-09-2020, 07:30 PM
(02-09-2020, 05:32 PM)cpolubin Wrote: I've been using this Rockler hose What Cliff said and I have it also and works very well. When I got mine it was a lot cheaper tho
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
02-09-2020, 09:22 PM
I just use a household vacuum cleaner hose, with a 2 1/4 inch adapter for the shop vac.
Oz
S.E. Alabama, formerly from Wisconsin.
02-10-2020, 06:12 AM
Whatever your choice, sizing down to a 1.5" hose is going to make life easier.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
02-10-2020, 07:10 AM
Any 1.5 inch hose will probably do better, you could also upgrade the vac to one of the euro styles like a festool or in my case a Nilfisk that has a more compliant hose as well as a tool power port so the sander cycles the vac on and off.
02-10-2020, 08:22 AM
I use this Bosch hose for my Festool saw and for my pocket screw jig. It is quite flexible and not nearly as expensive as the actual Festool hose. You may need an adapter for your ROS.
https://www.amazon.com/Bosch-16-4-Foot-V...755&sr=8-1
No animals were injured or killed in the production of this post.
02-10-2020, 08:48 AM
I also have the bosch. I believe they make two versions with one being antistatic. I ran solid PVC pipe from a shop vac to a hinged arm that swings out over the workbench. The arm has the bosch hose and also a 110 volt outlet that the sander plugs into
My .02
Karl |
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
