Posts: 12,197
Threads: 2
Joined: Nov 1999
Location: Nebraska City
… or three times.
Kitchen cabinets all done. Laundry cabinets and vanity all done. Main vanity all done. Tall linen last to go... and I marked the holes for the pulls on the two drawers wrong.
I only
drilled one of them wrong... but I punched the hole location (strongly) wrong on the other one as well. I guess one boo-boo out of 40 pulls is pretty good. And the one I drilled is in sap (on QSWO), so there's no way the sawdust & glue patch is gonna blend in.
Gonna irritate me every day for the rest of my life. Thankfully only once a day since the only thing I'll be in that bathroom for is the shower.
LOML is trying to be supportive.
They just don't understand.
Posts: 2,333
Threads: 0
Joined: Dec 2006
Location: virginia beach VA
On a big project, if I have less than 50 mistakes, I am feeling pretty good. One of my best qualities is I have a very short memory, so immediately after a do a project I see all the mistakes because I remember them, but pretty quickly , I forgot about them and don't really notice them. Congrats on getting the project done.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 231
Threads: 0
Joined: Jun 2005
(03-24-2020, 07:02 PM)KC Wrote: They just don't understand.
You are your own worst critic. We all are. Read this. It's called "The Man in the Arena," by Teddy Rooseveldt.
"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat."
Robin of Kingston
Posts: 40,213
Threads: 0
Joined: Apr 2007
I didn't do that but the last kitchen remodel I did had slide out drawers in the base cabinets. I marked all the places for pulls and got to drilling the first one that also went into the drawer behind it. I don't go into that kitchen often last time was about 8 months back and every time I open that cabinet it bugs me.
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 4,447
Threads: 0
Joined: Jan 2005
03-25-2020, 01:16 AM
(This post was last modified: 03-25-2020, 01:30 AM by mike4244.)
(03-24-2020, 07:02 PM)KC Wrote: … or three times.
Kitchen cabinets all done. Laundry cabinets and vanity all done. Main vanity all done. Tall linen last to go... and I marked the holes for the pulls on the two drawers wrong.
I only drilled one of them wrong... but I punched the hole location (strongly) wrong on the other one as well. I guess one boo-boo out of 40 pulls is pretty good. And the one I drilled is in sap (on QSWO), so there's no way the sawdust & glue patch is gonna blend in.
Gonna irritate me every day for the rest of my life. Thankfully only once a day since the only thing I'll be in that bathroom for is the shower.
LOML is trying to be supportive.
They just don't understand.
I had just finished installing a laminate kitchen countertop when the electrician dropped his side cutters from the top of a ladder onto the top. Must of landed straight down as the crack was about the size of nickel. Instead of replacing the top which would be a real PITA I asked the home owner if I could try something first. I got a silver dollar from the electrician who I knew collected coins.
I made a template for a router. I had originally thought a Forstner bit would be the simplest way to prepare the hole but needed a custom size for the coin.
After routing the hole I sprayed the coin with lacquer several times to prevent tarnish. I glued the coin with an epoxy.
The homeowner liked the fix, the electrician was only out a silver dollar instead of the cost of a 10'- 0 top with a 3'-0 return.
Depending on where your error was , maybe you could do something similar. Maybe a brass plug made from a small brass cabinet pull?
Just re-read your post. Get a plug cutter. Cut a plug , orient the grain with the tapered plug sitting proud of the door. Mark the plug to remove excess plug from the bottom. Cut it off leaving the plug 1/32" proud. glue the plug in making sure the grain is in line with the grain in the door. Use a glue that dries clear like Wonder glue. Later sand the plug flush.
Often with plugs the grain swirls and does not line up like you want. That is why I suggested marking the plug and cutting it 1/32" proud before gluing it in.
mike
Posts: 12,914
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
What Stwood said. Plug it or use filler; I've even used Bondo. Then paint in the color and add grain lines. Or, as others have said, celebrate the defect in some way.
John
Posts: 2,488
Threads: 0
Joined: Aug 2004
Posts: 917
Threads: 0
Joined: Sep 2008
In the last house I built for myself we were living in it for about a month when I noticed a piece of door casing where it meets the wall wasn't milled correctly. Couldn;t see it from the front. Every time i went into that room that is where my eye went automatically. After about two months of that i ripped it out and replaced it. Couldn't take it anymore. Wife said I was crazy. No one else would probably ever notice. She was probably right. But I did. Every time.
Posts: 12,197
Threads: 2
Joined: Nov 1999
Location: Nebraska City
(03-25-2020, 09:27 AM)jteneyck Wrote: What Stwood said. Plug it or use filler; I've even used Bondo. Then paint in the color and add grain lines. Or, as others have said, celebrate the defect in some way.
John
I filled it with CA and fine sanding dust from the immediate area. Looks bad so far, and I expect it'll be worse with stain. But I've decided to celebrate it as the 'rare' error in the overall scope of the project.
Yesterday for probably the 4th time since I've had the SawStop I misread the fence measurement guide. Not like it never happened in the past, but way more frequently than on the Xacata saw.
