Posts: 2,488
Threads: 0
Joined: Aug 2004
I've been thinking about building a roll around one with the grinder on top and somehow have an area for the wet stones,etc.
What doe some of you have in the line of a station?
Thanks
Jim
Jim
Posts: 6,678
Threads: 1
Joined: Jan 2003
Location: Southern California
Suggest you pop over to WoodCentral and read about the Unicorn profile / method. Depending on your needs, could change your thinking. It did mine.
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
Posts: 1,407
Threads: 2
Joined: Jun 2003
(08-18-2020, 01:17 AM)cputnam Wrote: Suggest you pop over to WoodCentral and read about the Unicorn profile / method. Depending on your needs, could change your thinking. It did mine.
I Keep my grinder away from my stones.
A mobile base may have stability issues if you're using stones.
Posts: 6,678
Threads: 1
Joined: Jan 2003
Location: Southern California
(08-18-2020, 09:05 AM)rwe2156 Wrote: I Keep my grinder away from my stones.
A mobile base may have stability issues if you're using stones.
The unicorn method can be accomplished with a grinder and a single ~1000 - 1200 grit stone. If diamond then no oil or water needed.
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I don't use stones, only slow wet grinder and WS. But I built something that might look like Norm's version of a station. Basically it's not more than a cabinet on wheels, covered with HPL to make the top waterproof. With a wet grinder I find it's too tall foto use in some situations, s I have to put it on a lower stand.....Norm built a retractable shelf to stand on with his.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
