Posts: 36,538
Threads: 3
Joined: Nov 2004
Location: RTP, NC
(08-21-2020, 04:47 AM)Snipe Hunter Wrote: 2 things come to mind. Weather protection and GFCI. Any outdoor switch or receptacle needs to be in a weather tight enclosure and be on a GFCI circuit.
If it were me I would figure out a way to protect this circuit via GFCI. I would then wire the dimmer to the GFCI protection. I would then run up the house to a box and eliminate the outlet. Just run the cord for the lights into the bottom of the box and wire nut them to the feed from the dimmer.
Posts: 1,936
Threads: 0
Joined: Feb 2008
Like Tom said, use a GFCI power source, even if you have to add a GFIC receptacle. Now you can put a dimmer switch in a weather tight box with a lift up cover. If you want to avoid the question of dimming a receptacle, just hard wire it in a weather tight box. It would probably look neater than the cord cap and receptacle anyway.
Sign at N.E. Vocational School Cabinetmaking Shop 1976, "Free knowledge given daily... Bring your own container"
Posts: 64,661
Threads: 3
Joined: Feb 2007
Location: Merryland
(08-21-2020, 11:05 AM)crokett™ Wrote: If it were me I would figure out a way to protect this circuit via GFCI. I would then wire the dimmer to the GFCI protection. I would then run up the house to a box and eliminate the outlet. Just run the cord for the lights into the bottom of the box and wire nut them to the feed from the dimmer.
I'd just put in a GFCI breaker at the distribution panel. They're more reliable and easier imho. GFCI receptacles take up a lot of room in a work-box.
Posts: 36,538
Threads: 3
Joined: Nov 2004
Location: RTP, NC
(08-22-2020, 06:36 AM)Snipe Hunter Wrote: I'd just put in a GFCI breaker at the distribution panel. They're more reliable and easier imho. GFCI receptacles take up a lot of room in a work-box.
I just said protect it via GFCI. could be a breaker, could be an outlet. That's up to him. He doesn't say where the power is going to come from.
Posts: 2,201
Threads: 1
Joined: Oct 2003
(08-22-2020, 05:30 PM)crokett™ Wrote: I just said protect it via GFCI. could be a breaker, could be an outlet. That's up to him. He doesn't say where the power is going to come from.
Yes, gfci protection needs to be assumed. It is code required. Which code approved dimmer should he use with it? I could not find one.
Posts: 36,538
Threads: 3
Joined: Nov 2004
Location: RTP, NC
(08-22-2020, 06:45 PM)srv52761 Wrote: Yes, gfci protection needs to be assumed. It is code required. Which code approved dimmer should he use with it? I could not find one.
I wouldn't put a dimmer switch outside. There are weatherproof switch covers, but those are designed for normal light switches. I couldn't find one for a dimmer switch. An in-use receptacle cover might work to cover a dimmer switch outside. I have no idea if it would be code compliant.
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
(08-22-2020, 06:45 PM)srv52761 Wrote: Which code approved dimmer should he use with it? I could not find one.
I couldn’t either. That’s why I stopped - had nowhere good to go.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 728
Threads: 0
Joined: Aug 2002
for the time being, i just bought an outdoor rated switch (non dimming) and i will install that.
Once all the lights are installed, i will see if they seem too bright at all-- if so, i will try the dimming option. Don't really think i want to chop the plug end off these light sets, as they weren't cheap, and they do come with a 3 yr warranty.
Thanks for all the replies
Colin
Posts: 1,998
Threads: 1
Joined: Aug 2016
(08-24-2020, 07:29 AM)Cdshakes Wrote: for the time being, i just bought an outdoor rated switch (non dimming) and i will install that.
Once all the lights are installed, i will see if they seem too bright at all-- if so, i will try the dimming option. Don't really think i want to chop the plug end off these light sets, as they weren't cheap, and they do come with a 3 yr warranty.
Thanks for all the replies
Colin
How about something like
THIS . This way it is all legal, you could do without the switch you bought. Roly
