Posts: 19,160
Threads: 0
Joined: Sep 2003
08-28-2020, 11:36 PM
(This post was last modified: 08-29-2020, 11:57 AM by brewmaster.)
I've never sent a blade out to get serviced until my WW2 40 tooth needed some work. The red blades have been my go to and I just used them until I tossed them or made scrapers out of 'em. Several broken carbides and others were pretty worn. I thought the blade was toast or at least would cost an amount that was close enough to a new one that I should scrap it. I sent it (WW2 40 tooth) to Forest just to see with the instructions to call me with an estimate. I didn't hear anything for a couple weeks-not surprised with Covid and such. Anyway, last week my blade made it back to me. Sharp as can be with a bunch of new tips. Pretty much back to new. There were at least a dozen and a half tips that were replaced. Shipped well and in their wax wrapping and cardboard box.
Total cost? $39.00. 27 to sharpen and 12 to ship-no charge for replacing a bunch to tips.
Pretty good service.
I just bought a forest rip blade to add to the arsenal.
Easy process. I'd do it again in a heartbeat. I steered clear of the spendy blades because I thought sharpening was going to be a PITA. It wasn't. Easy peasy.
-brew
Posts: 2,078
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
Good to hear. I never thought much of the Forrest blades. I may have to change my mind.
I appreciate the honest post.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 19,160
Threads: 0
Joined: Sep 2003
Yeah-I do not know if they are worth the money-that is relative. Made in USA is a selling point for me. I have an Amana 40 tooth on my saw now and it does a fine job at half the price of the WW2 40 tooth. I leave it on because I won't cry quite as much if I hit a nail or my neighbor brings over a 2x4 to rip that has been sitting on the ground for 20 years.
-brew
Posts: 769
Threads: 0
Joined: Jan 2007
Location: ATL
You got some kind of deal , goodwill , or were mistaken about how many teeth were replaced. Their rack rate for what you described should have been $115.
All the good national sharpening services make it that easy. They can't match that pricing replacing 18 teeth though.
I have a couple of forrest blades and while very good, I don't find the cuts near as good as ridge carbide or even the freud fusion. The fusion is almost half the price too. A lot depends on the saw and the material being cut, so YMMV.
Posts: 19,160
Threads: 0
Joined: Sep 2003
Definitely replaced. I do not know what I hit but they were beyond repair and replaced.
I am going to try Ridge on my next purchase. I actually had some in a cart not long ago and just didn't pull the trigger. Probably the 8 inch finger joint set or the 10 inch flat top...
-brew
Posts: 7,227
Threads: 1
Joined: Mar 2004
Location: Western Colorado
08-30-2020, 09:22 AM
(This post was last modified: 08-31-2020, 01:21 PM by camp10.)
My heart sank when I saw the subject of this post. I thought maybe you had trouble with their service.
Yesterday, I dropped off my two Forrest WWII blades at the USPS. I've always sent them back to Forrest for sharpening. The old one has seen pretty heavy usage for 20+ years. I've had it sharpened 4 or 5 times. Over the years I've had a couple teeth replaced. I thought they charged me a couple bucks, but I might have been wrong.
I bought a new one at a sale, and hit a nail within the first couple of uses.
I've been using a couple of Freud blades, probably about 10 years old. They are so much noisier than the Forrest.
Posts: 9,459
Threads: 0
Joined: Dec 2004
For those that hate their forrest blades, send them my way. I mostly find guys with issues with them dont even own them.
I do have a 12" ridge carbide dado stack for the RAS. Its ral nice too.
Glad its my shop I am responsible for - I only have to make me happy.
Posts: 1,407
Threads: 2
Joined: Jun 2003
Geez I just remembered I send a dado set off over 2 weeks ago and haven't heard anything from them.
Posts: 13,412
Threads: 4
Joined: Jun 2007
Location: New Jersey
(08-30-2020, 10:40 AM)BloomingtonMike Wrote: For those that hate their forrest blades, send them my way. I mostly find guys with issues with them dont even own them.
I do have a 12" ridge carbide dado stack for the RAS. Its ral nice too.
Ridge Carbide makes a very good blade as well, and also does excellent resharpening work. At the time it was slightly cheaper than forrest, I got mine at a woodworker's show years ago, still going strong.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 10,717
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
Maybe I'm living under a rock. This is the first thread I've ever read where someone said he didn't like Forrest blades. I find them to be excellent blades. I've never had an issue with any of them. I've tried Freud Fusion blades as well. They are nice, but I think the Forrest blades (full kerf) are more vibration tolerant.
Still Learning,
Allan Hill
