It has a very flat head, like a pan head but the top is flat, and very thin. Probably metric because the parts lists calls it a m27-1.5 inches long. The point if flat.
The screw is to hold a slider metal bar on a porch swing into an upright made out of Trex.
(09-11-2020, 08:39 PM)sroxberg Wrote: It has a very flat head, like a pan head but the top is flat, and very thin. Probably metric because the parts lists calls it a m27-1.5 inches long. The point if flat.
(09-13-2020, 06:09 PM)AHill Wrote: The threads look very similar to those used for particle board or MDF. Closest I can come up with a a truss head deck screw.
That’s my impression. A thick wafer head screw, for particle board.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
(09-11-2020, 08:39 PM)sroxberg Wrote: It has a very flat head, like a pan head but the top is flat, and very thin. Probably metric because the parts lists calls it a m27-1.5 inches long. The point if flat.
The screw is to hold a slider metal bar on a porch swing into an upright made out of Trex.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
