Posts: 7,421
Threads: 1
Joined: Sep 2005
I purchased some 2" x 4" x 8' framing lumber.
I am well aware that the 2" x 4" = 1½" x 3½", but I was not aware that the eight-foot length would measure 93".
I guess it makes sense. If you add a bottom plate and a top plate, you are adding 3" so the total equals 96", however I wanted the full 8 feet for my application.
Has this always been so? Or is it only at Lowes? Or only recent?
No animals were injured or killed in the production of this post.
Posts: 2,198
Threads: 1
Joined: Sep 2003
Location: Maryland
93" studs are "pre cuts". I'm sure they sell both lengths. Perhaps it wasn't marked well or put in the correct spot? They've been around for years.
Posts: 7,421
Threads: 1
Joined: Sep 2005
(12-28-2020, 08:56 AM)joe1086 Wrote: 93" studs are "pre cuts". I'm sure they sell both lengths. Perhaps it wasn't marked well or put in the correct spot? They've been around for years.
Maybe I missed the sign. I will go back and check.
No animals were injured or killed in the production of this post.
Posts: 8,389
Threads: 1
Joined: Mar 2000
Menards offers "pre-cut" framing lumber, too. Sometimes the price per stick is the same as the "normal" length; sometimes, the pre-cuts cost more. You just gotta watch what you're getting.
Posts: 917
Threads: 0
Joined: Sep 2008
Check your precuts again. They should be 92 5/8. That is the standard for the reasons you listed.
Posts: 20,866
Threads: 1
Joined: Sep 2003
Location: Sioux Falls SD
(12-28-2020, 08:41 AM)Cooler Wrote: I purchased some 2" x 4" x 8' framing lumber.
I am well aware that the 2" x 4" = 1½" x 3½", but I was not aware that the eight-foot length would measure 93".
I guess it makes sense. If you add a bottom plate and a top plate, you are adding 3" so the total equals 96", however I wanted the full 8 feet for my application.
Has this always been so? Or is it only at Lowes? Or only recent?
Precut stud length lumber comes in 92-5/8" and 104 5/8" length.
It allows for sills and plates and 8' drywall on the studs with a half inch space under the drywall at the baseboard after you put the 5/8" ceiling drywall up first. The 104-5/8" is for 9' ceilings.
WoodNET... the new safespace
Posts: 18,961
Threads: 0
Joined: Jul 2002
Location: Ohio
8' should actually be 8'. Maybe the sign said "for 8' walls"???
Posts: 7,421
Threads: 1
Joined: Sep 2005
12-29-2020, 08:11 AM
(This post was last modified: 12-29-2020, 08:18 AM by Cooler.)
(12-28-2020, 10:13 PM)JosephP Wrote: 8' should actually be 8'. Maybe the sign said "for 8' walls"???
I have to buy some more items at Lowes so I will go back on Saturday and check.
I just went to Lowes website.
They list
2-in x 4-in x 92-5/8-in Douglas Fir Stud at $5.08 each
and
2-in x 4-in x 96-in Douglas Fir Stud at $6.10 each
So 3-3/8" costs $1.02? Does that make sense? At that rate, an 8 footer would cost $29.02 each. I don't get it. I will check the store signage on Saturday and report.
https://www.lowes.com/search?searchTerm=...+4%22+stud
No animals were injured or killed in the production of this post.
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
Usually studs are more expensive or the same price as 8' lumber. Rarely is a stud cheaper. They charge more because it's a labor saver.
Posts: 36,538
Threads: 3
Joined: Nov 2004
Location: RTP, NC
You bought stud length (IE used for wall studs). The full 8’ cost more because of volume, the lumber companies sell a a lot more stud length. You may see them marked in the store as stud length.
