Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
I have a Whiteside SC102, which makes a slot for the screw and a counterbore for the head at the same time. I like it for drawer bottoms, but I would prefer a smaller version. It is meant for #8 screws (I use #6 with a washer, works, but the grooves are bigger than they need to be). I see a few others around the web, and they are all for #8 screws.
Does anyone make a smaller version, for #6 or even #4/5?
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 2,581
Threads: 0
Joined: Apr 2012
Just about everybody makes them for #8 screws, but it looks like Timberline might make what you're looking for -
Timberline 630-100 Flat Bottom Carbide Tipped Counterbore 3/8 D x 1/8 Drill D x 5/16 SHK for Wood Screw Size #4 - 6
https://www.toolstoday.com/v-8245-630-100.html
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
(12-30-2020, 09:42 PM)Phil S. Wrote: Just about everybody makes them for #8 screws, but it looks like Timberline might make what you're looking for -
Timberline 630-100 Flat Bottom Carbide Tipped Counterbore 3/8 D x 1/8 Drill D x 5/16 SHK for Wood Screw Size #4 - 6
https://www.toolstoday.com/v-8245-630-100.html
Thank you for the lead. That is intended for a drill press, though, isn't it? It does look useful, but I don't think you can cut a channel with it.
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Something else I'll learn today...I had never seen those bits. They do look useful, I'll add one to the list.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 1,407
Threads: 2
Joined: Jun 2003
12-31-2020, 09:15 AM
(This post was last modified: 12-31-2020, 09:23 AM by rwe2156.)
(12-31-2020, 06:18 AM)fredhargis Wrote: Something else I'll learn today...I had never seen those bits. They do look useful, I'll add one to the list.
Never seen them, either. I'm wondering if they would do for plugs?
How clean are the cuts, Aram?
Just found out Snappy makes one looks like would cut cleaner counterbore.
https://www.amazon.com/Snappy-Bottom-Cou...12&sr=8-12
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
(12-31-2020, 09:15 AM)rwe2156 Wrote: How clean are the cuts, Aram?
The
Whiteside SC102 cuts very clean. One pass per drawer bottom, perfect.
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
