01-09-2021, 10:19 AM
Does anyone make a 1/8 in. blade with less then 14 teeth or a skip tooth one?
|
1/8 band saw blades
|
01-14-2021, 02:01 PM
(01-09-2021, 10:19 AM)bgosh Wrote: Does anyone make a 1/8 in. blade with less then 14 teeth or a skip tooth one? Have you tried Carter? Ignore the form and call them. I had a 40's bandsaw and had to order all of my blades specially made, they never failed me. Now, I've not needed <14 on a 1/8, but I have had some pretty (to me) odd requests.
Mike
I work on the 50-50-90 rule: If there's a 50-50 choice, I'll pick the wrong one 90% of the time! 
01-14-2021, 02:20 PM
What is your intended use? If it is fairly intricate curves in thicker wood take a lesson form the bandsaw box builders and try a 3/16 10 tooth blade out. It is my favorite blade for everything but long straight cuts.
Proud maker of large quantities of sawdust......oh, and the occasional project!
|
|
|
Users browsing this thread: 1 Guest(s)