Posts: 833
Threads: 0
Joined: Nov 2006
It seems like I may get the opportunity to purchase a 24" thicknesser very cheap. This because the cutterhead is both damaged and of theclamshell type which is no longer legal for professional use.
However finding an affordable cutterhead for it seems almost impossible.
Where are those alleged stashes of surplus cutterheads that were left over when the rich started buying helical cutterheads?
It doesn't add up does it.......
Part timer living on the western coast of Finland. Not a native speaker of English
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I'm doubtful there's a stash of 24" ones anywhere. There's probably quite a few of the smaller ones laying around, but I'd bet you'll have to be having one made.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 706
Threads: 0
Joined: Dec 2006
I have a 13" one from a Jet planer/molder lying around. I had to move the box this morning. I took a look at it and thought to myself "self? Am I ever going to use this again? ... probably not" and put it in a corner. I bet most folks threw them out instead.
Try a scrapyard?
Computer geek and amateur woodworker.
Posts: 1,383
Threads: 0
Joined: Sep 2007
(01-18-2021, 12:27 PM)fredhargis Wrote: I'm doubtful there's a stash of 24" ones anywhere. There's probably quite a few of the smaller ones laying around, but I'd bet you'll have to be having one made.
I'll have to agree. The strongest buyers of the chippy heads are the recreational woodworkers. Some commercial shops are changing but often its cheaper to buy a whole new planer and take it off the taxes as an expense or capitol investment.
Posts: 5,633
Threads: 0
Joined: Nov 2004
(01-18-2021, 12:10 PM)TGW Wrote: It seems like I may get the opportunity to purchase a 24" thicknesser very cheap. This because the cutterhead is both damaged and of theclamshell type which is no longer legal for professional use.
However finding an affordable cutterhead for it seems almost impossible.
Where are those alleged stashes of surplus cutterheads that were left over when the rich started buying helical cutterheads?
It doesn't add up does it.......
What make and model machine? I may be able to help out.
Posts: 833
Threads: 0
Joined: Nov 2006
(01-19-2021, 02:20 PM)Brian in sunny FL Wrote: What make and model machine? I may be able to help out.
The manufacturer was Franz Dornburg AG in Coburg in Germany. Probably made before the war. Model unknown but I could take measurements.
Having a secondhand cutterhead shipped from the US would cost a bit but buying one locally would be totally exorbitantly expensive.
Part timer living on the western coast of Finland. Not a native speaker of English
Posts: 10,279
Threads: 1
Joined: Nov 2001
Location: Prince Frederick, MD
Yeah, 6, 8, 12, and maybe even 16" are easy to find.
24"?
Not so much.
Semper fi,
Brad
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
24" isn't common in the states anymore.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 5,633
Threads: 0
Joined: Nov 2004
(01-19-2021, 02:54 PM)TGW Wrote: The manufacturer was Franz Dornburg AG in Coburg in Germany. Probably made before the war. Model unknown but I could take measurements.
Having a secondhand cutterhead shipped from the US would cost a bit but buying one locally would be totally exorbitantly expensive.
That's one I never heard of, sorry can't help.
