Posts: 505
Threads: 0
Joined: Jul 2002
Just about got my 7' x 4' hickory breakfast room table top flattened and ready for sanding/finishing. Holy crap that stuff is hard! I've never built anything with hickory so I was looking for advice on how to finish it given it is a breakfast table (and there are grandkids around a lot). Being as hard and dense as it is, I had heard someone say not to sand over 100 grit. It has varying color, light and dark, plus I left some knots in it. I was thinking just poly but I wondered what others have done with hickory.
Thanks,
Paul
"Some glue, some brads while the glue dries, and that's not going anywhere!"
Norm
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I've done a fair amount, and mostly I've just put a coat of varnish on it. I do sand to 150 with the ROS, and then hand sand with 180. For all tha aggravation of working with it, it's one of my favorite woods (appearance wise).
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 892
Threads: 0
Joined: Apr 2006
Location: Trout Creek, Montana
I use a lot of Calico Hickory. Lots of browns to cream colors. I sand it to 220 starting with 180. The only finish I have used is Arm-R-Seal satin, 3 coats, sanding 320 between coats. Make sure to wipe it down with water or mineral spirits after sanding. The wood is so hard it is tuff to get all the machining marks sanded off.
Treat others as you want to be treated.
“You only live once, but if you do it right, once is enough.” — Mae West.
24- year cancer survivor
Posts: 1,407
Threads: 2
Joined: Jun 2003
Its going to darken over time.
Posts: 505
Threads: 0
Joined: Jul 2002
Thanks for the replies. I didn't realize hickory would darken over time. I know all the stuff I've made with cherry sure does. My wife will be happy to hear that. She was envisioning darker!
Paul
"Some glue, some brads while the glue dries, and that's not going anywhere!"
Norm
Posts: 90
Threads: 0
Joined: Dec 2004
Two coats poly with a 220/320 sanding between coats and plenty of drying time. Depending how shiny you want. I did hickory cabinets for a friend he wanted shiny so I used the gloss,he loved them
Posts: 1,407
Threads: 2
Joined: Jun 2003
03-17-2021, 08:30 AM
(This post was last modified: 03-17-2021, 08:31 AM by rwe2156.)
Polyacrylic and most all the Target Coatings products will dry clear.
Whatever you do, don't do gloss unless that top is absolutely perfect.
