Posts: 22,682
Threads: 0
Joined: Oct 2007
Location: Burlington, North Carolina
(04-14-2021, 11:01 PM)hbmcc Wrote: What!!! ?? That's firewood. Make some smores...
I'm not making smores with this but I am making a lot of dull carbide.
I've heard how awful this stuff is to tooling but working with it is nearly impossible without carbide. And even then carbide dulls shockingly fast.
Two swipes with a hand plane turns a razor sharp A2 blade into a dull steak knife. That's actually not an exaggeration. D2 or M2 isn't much better. O1, one swipe. PM V11 will give you three swipes. Also not an exaggeration.
Tooling lasts longer working brass than Lignum Vitae.
Posts: 116,091
Threads: 0
Joined: Jun 2002
Location: Sparkling Clearwater, Fl. Tampa Bay Area
(04-15-2021, 10:24 AM)Peter Tremblay Wrote: I'm not making smores with this but I am making a lot of dull carbide.
I've heard how awful this stuff is to tooling but working with it is nearly impossible without carbide. And even then carbide dulls shockingly fast.
Two swipes with a hand plane turns a razor sharp A2 blade into a dull steak knife. That's actually not an exaggeration. D2 or M2 isn't much better. O1, one swipe. PM V11 will give you three swipes. Also not an exaggeration.
Tooling lasts longer working brass than Lignum Vitae.
...........................
But Lignum is a wonderful wood for tools....
You may want to try changing the bevel angle a bit steeper Peter...Your diamond hone should work for that...make for a stronger edge..
Often Tested. Always Faithful. Brothers Forever
Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Posts: 22,682
Threads: 0
Joined: Oct 2007
Location: Burlington, North Carolina
(04-15-2021, 10:51 AM)Timberwolf Wrote: ...........................
But Lignum is a wonderful wood for tools....
You may want to try changing the bevel angle a bit steeper Peter...Your diamond hone should work for that...make for a stronger edge..
True, but I'm not making too many things so I'm hesitant to change the edge geometry of a lot of my tools.
