Posts: 4,011
Threads: 0
Joined: Nov 2010
While digging out all the scraps to be used for the current project...came upon this "gem"
Hmmm, measures out to ~ 7-1/2"....slots are every 1/4", out to 5-1/2"
Doubt IF there had ever been any wood on the handle. Nor did I find any logo to tell whom made this..
Interesting?
Show me a picture, I'll build a project from that
Posts: 3,017
Threads: 1
Joined: Aug 2009
07-06-2021, 01:56 PM
(This post was last modified: 07-06-2021, 01:57 PM by Bill_Houghton.)
I've seen other examples of that design. Either from a "boy's tool kit" or from the equivalent of the 99-cent tool offerings. No, probably never any wood on the handle.
Posts: 2,036
Threads: 0
Joined: Jan 2003
I've also acquired a couple of these and I agree they are probably from a "boy's tool kit".
Posts: 13,412
Threads: 4
Joined: Jun 2007
Location: New Jersey
07-08-2021, 10:36 AM
(This post was last modified: 07-08-2021, 10:37 AM by Admiral.)
As a kid, my "Handy Andy" kit had one quite similar....
![[Image: s-l1600.jpg]](https://i.ebayimg.com/images/g/c~0AAOSwPHZc1Gn8/s-l1600.jpg)
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 4,011
Threads: 0
Joined: Nov 2010
this one seems to be a little better made version...
One could hold a marking knife in a slot.....to mark a line a set distance from an edge. Maybe then use that line to rip a board to width....like IF you wanted a board 4-1/2" wide, from a 1 x 12? Hole in the handle can be for a better grip...
Show me a picture, I'll build a project from that
