Posts: 3,733
Threads: 1
Joined: Apr 2008
There is no such thing as too much horsepower, free lunch or spare change ~ anonymous
87% of people say their mental health is good to excellent. The rest are sane enough to know they are lying. ~ anonymous
Posts: 527
Threads: 0
Joined: Feb 2021
Location: Stevi, Montana
(10-01-2021, 07:12 PM)Handplanesandmore Wrote: TOO TOO MUCH WORK!
Simon
Nah, sometimes to have things back as original...
Posts: 10,793
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
The caps from the family dollar store condiment bottles screw right on to a titebond bottle....just throw the bottle away, they are junk and split easily.
Ed
Posts: 2,384
Threads: 0
Joined: Dec 2011
(10-02-2021, 02:24 PM)MT Woodworker Wrote: Nah, sometimes to have things back as original...
Back as original makes good sense...but not in this case because the original isn't good enough.
Anyone who glues enough (not necessarily with Titebond) knows a simple, quick solution to a stuck cap or blocked tip is a good solution. Of course, anyone can wash and clean glue bottle cap and tip every time before or after a glue-up job...but it ain't what most woodworkers do -- -- at least I know none who does that on a regular basis, nor is it a solution that belongs to the "should've done it years ago dept."
Simon
Posts: 1,601
Threads: 0
Joined: Jan 2014
(10-01-2021, 07:40 PM)Ray Newman Wrote: Just put the cap between your teeth and pull. Just like pulling the pin on a hand grenade.
Yup!
Posts: 2,384
Threads: 0
Joined: Dec 2011
A trip to the dental office over broken teeth (for guys over 70) could be a good reminder why younger folks can do anything they want. :-)
Simon
Posts: 813
Threads: 0
Joined: May 2007
Location: Jackson, WY
I have upgraded to the super high end glue dispenser. A worthy investment.
https://www.amazon.com/FastCap-Glu-Bot-G...3119&psc=1
A carpenter's house is never done.
Posts: 2,384
Threads: 0
Joined: Dec 2011
The Fastcap bottles, at least for the smaller ones, also clog over time, and that is partly why they sell replacement tips (for lazy people who don't want to clean things).
The good thing about the Fastcap is more in controlling the amount of glue you want to dispense than avoiding blocked tip. The silicone cap string is also prone to breaking but again you can get replacement caps. It's good for delicate or repair jobs, but for large applications when you need lots of glue to flow, the factory glue bottles are just as good if not better.
Simon
Posts: 72
Threads: 0
Joined: Feb 2021
I just pick the booger out and go on. You'll be surprised with how big it actually is. It can take a few thumps or flings to get it ff your finger too.
Posts: 675
Threads: 0
Joined: Aug 2011
10-04-2021, 04:10 PM
(This post was last modified: 10-04-2021, 04:11 PM by bhh.)
(10-01-2021, 07:40 PM)Ray Newman Wrote: Just put the cap between your teeth and pull. Just like pulling the pin on a hand grenade.
i use a pair of ChannelLocks. Keep them next to the bench
