Posts: 2,574
Threads: 0
Joined: Feb 2001
I have a corded dewalt track saw that takes a 6.5 inch or 165mm blade with 20mm arbor.
I currently have a Freud blade on it that is 160mm rather than 165mm, it would be nice to find a good blade that’s the full 165mm diameter, does anyone know of a good one 165mm with 20mm arbor hole?
Thanks
Duke
Posts: 11,666
Threads: 0
Joined: Dec 2006
12-29-2021, 05:26 PM
(This post was last modified: 12-29-2021, 06:16 PM by Lumber Yard®.)
I use the Oshlun FesPro blades on my Dewalt tracksaw. They have several different blades available for different applications. Usually they are around $30-$35. IIRC some are 160mm and others are 165mm/6.5" HTH.
Here is an Amazon links for a couple of them but there are several more versions:
https://www.amazon.com/gp/product/B07XZTJ1KJ
https://www.amazon.com/gp/product/B0030GGFRS
Posts: 2,574
Threads: 0
Joined: Feb 2001
(12-29-2021, 05:26 PM)Lumber Yard® Wrote: I use the Oshlun FesPro blades on my Dewalt tracksaw. They have several different blades available for different applications. Usually they are around $30-$35. IIRC some are 160mm and others are 165mm/6.5" HTH.
Here is an Amazon links for a couple of them but there are several more versions:
https://www.amazon.com/gp/product/B07XZTJ1KJ
https://www.amazon.com/gp/product/B0030GGFRS
Thanks, I ordered one of the 165mm ones, will see how it compares to the 160mm Freud that I have on there.
Posts: 1,815
Threads: 0
Joined: Aug 2008
There's a 165mm version of the WoodWorker II that I bought for my Makita Tracksaw. I found it at Silvers Mill (online reseller)
Posts: 2,574
Threads: 0
Joined: Feb 2001
Thanks for the lead on the Forrest 165mm blade.
It says they are still designed for table saw and at over $100 I think I’ll either stay with the oshlun blade or get another 160mm Freud
Thanks
Duke
Posts: 1,815
Threads: 0
Joined: Aug 2008
(01-04-2022, 05:43 PM)JDuke Wrote: Thanks for the lead on the Forrest 165mm blade.
It says they are still designed for table saw and at over $100 I think I’ll either stay with the oshlun blade or get another 160mm Freud
Thanks
Duke
All I can say is I cut 1 1/2" walnut double tapered legs with my track saw for an end table and didn't need to sand any imperfections out. Tracksaw to fettling the oddball leg joint I made for the project to glue up. Some things are worth paying for.
Posts: 769
Threads: 0
Joined: Jan 2007
Location: ATL
Here are more 165mmx20 blades than you can shake a stick at:
https://www.amazon.com/Circular-Blades-1...B07Q2959G5
