Posts: 10,279
Threads: 1
Joined: Nov 2001
Location: Prince Frederick, MD
03-08-2022, 01:10 PM
Customer wants oil based poly on the walnut table I'm building. I like using Varathane's oil poly cut 50% with mineral spirits to make a wipe on poly.
As we all know, walnut looks amazing when BLO is poured over it. My question is this: Should I apply BLO and then the oil poly or should I just apply the oil poly? Will the application of the BLO even be noticeable?
Or should I mix up a batch of 1:1:1 poly, mineral spirits, and BLO?
Semper fi,
Brad
Posts: 12,876
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(03-08-2022, 01:10 PM)®smpr_fi_mac® Wrote: Customer wants oil based poly on the walnut table I'm building. I like using Varathane's oil poly cut 50% with mineral spirits to make a wipe on poly.
As we all know, walnut looks amazing when BLO is poured over it. My question is this: Should I apply BLO and then the oil poly or should I just apply the oil poly? Will the application of the BLO even be noticeable?
Or should I mix up a batch of 1:1:1 poly, mineral spirits, and BLO?
Yes, BLO really brings out the colors in walnut, especially air-dried stock. And yes, you will see a difference if you use BLO first. In any case, it doesn't take much; you do not want or need to pour it on. You need nothing more than a very light coat wiped on with a rag and then left to cure before applying the OB poly. 24 hours at 70F should do it.
That's the approach I'd take if applying a poly topcoat. Your other approach of using a varnish/oil/MS mix does not require nor need pretreatment with BLO.
John
Posts: 12,603
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
The film of the danish oil may be a little softer than straight varnish, and may not be as durable as the varnish applied over the BLO. Just something to keep in mind.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 10,717
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
Mix it all together. It'll cut your cure time quite a bit. I've seen the 1:1:1 MS/BLO/Poly mix recommended in several sources - even on this forum.
Still Learning,
Allan Hill
