Posts: 14,849
Threads: 10
Joined: Jan 2010
Location: southeastern VA
The thread looking for a source for a 1-1/4" spindle for a PM29 (posted by pescadoman360) got me looking at that shaper.
At least for the version sold by SouthernTool, it comes new with 3 different spindle sizes: 3/4", 1", and 1-1/4".
Why would a shaper come with 3 different spindles?
Are there advantages to the different spindle sizes?
Other than my ShopSmith's I haven't really looked into shapers. So, I am a newb on this tool.
thanks
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
Posts: 10
Threads: 0
Joined: Apr 2022
When I started looking, the general opinion was that 3/4 tools are much cheaper and more available, but not as suitable for swinging larger cutters.
Posts: 3,657
Threads: 0
Joined: Jan 2005
(04-21-2022, 11:39 PM)iclark Wrote: Why would a shaper come with 3 different spindles?
Are there advantages to the different spindle sizes?
Why: because many people may be upgrading shapers from a smaller one and have different size shaper cutters already in different bores. I have some 1/2" bore cutters from my 1st shaper. I also have a number of 3/4" bore cutters and a few 1.25" bore cutters. The big ones have much more mass to them along with a larger price tag associated with them. I'm not pumping stuff through the shaper 8 hours a day so I have a hard time justifying the additional cost for large bore cutters. The majority of my cutters are 3/4" bore and they've worked just fine for me.
My 2 cents.
Posts: 14,849
Threads: 10
Joined: Jan 2010
Location: southeastern VA
(04-22-2022, 08:00 PM)hcbph Wrote: Why: because many people may be upgrading shapers from a smaller one and have different size shaper cutters already in different bores. I have some 1/2" bore cutters from my 1st shaper. I also have a number of 3/4" bore cutters and a few 1.25" bore cutters. The big ones have much more mass to them along with a larger price tag associated with them. I'm not pumping stuff through the shaper 8 hours a day so I have a hard time justifying the additional cost for large bore cutters. The majority of my cutters are 3/4" bore and they've worked just fine for me.
My 2 cents.
thanks
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
