Posts: 10,279
Threads: 1
Joined: Nov 2001
Location: Prince Frederick, MD
I need four straight grained blanks for making cabriole legs but cannot find any bigger than 3.5" square.
Got any?
Semper fi,
Brad
Posts: 14,789
Threads: 10
Joined: Jan 2010
Location: southeastern VA
(03-22-2023, 10:24 PM)®smpr_fi_mac® Wrote: I need four straight grained blanks for making cabriole legs but cannot find any bigger than 3.5" square.
Got any?
Do you mind if they are curly? I am not sure about the straight-grained part.
If curly is okay, then there is a good chance that Dunlap Woodcraft would have what you need. They are over close to Dulles airport.
They are great people to deal with. I visit them whenever I can to go through their cutoff bin. Giving them a call could save you a trip.
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
Posts: 118
Threads: 0
Joined: May 2014
Location: Maryland
Second the motion on Dunlap. Good folks.
Gotta be careful though. They have a bunch of really nice stuff
Posts: 10,279
Threads: 1
Joined: Nov 2001
Location: Prince Frederick, MD
These need to be straight to match the aprons but I'll give them a call.
Thanks!
Semper fi,
Brad
Posts: 2,188
Threads: 1
Joined: Sep 2003
Location: Maryland
Just a suggestion to call Exotic Hardwood in Annapolis off Rt. 50.
Posts: 12,803
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(03-22-2023, 10:24 PM)®smpr_fi_mac® Wrote: I need four straight grained blanks for making cabriole legs but cannot find any bigger than 3.5" square.
Got any?
Osborne makes all kinds of table legs. They might sell you some blanks.
John
Posts: 1,955
Threads: 0
Joined: Aug 2001
(03-22-2023, 10:24 PM)®smpr_fi_mac® Wrote: I need four straight grained blanks for making cabriole legs but cannot find any bigger than 3.5" square.
Got any?
If'n the other ideas closer to you do not work out, might want to check Hearne Hardwoods in Nottingham, PA, just over the MD border on US1. They are a full-service sawmill, kiln, and tool purveyor, with massive stacks of lumber to sort through including monstrous slabs and exotics. Several years ago I bought a 5-foot 4X6 chunk of straight-grain walnut to make gun stocks there, plus some prime mahogany to make end tables matching an ancient sleigh-bed bedroom set and miscellaneous pieces of cherry.
Up the road from there in Quarryville is Groff & Groff, a similar outfit (and prior partners with Hearne). I once toured their facility but only came home with a few cutoffs.
Either way, as someone suggested, go to these with blinders on or a tight grip on the credit card!
Gary
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I've got what I think is an 8' 4x10 HM blank. I'll have to ck the size again.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 64,296
Threads: 3
Joined: Feb 2007
Location: Merryland
(03-23-2023, 11:09 AM)joe1086 Wrote: Just a suggestion to call Exotic Hardwood in Annapolis off Rt. 50.
I'm sure he could get them but he's pricey.
A longer drive but Hicksville Planing Mill north-west of Hagerstown can mill some. They'll be a good bit cheaper but the fuel to get there may not be worth the drive. They're a Mennonite owned business so no web page and they don't advertise. Make sure you know their hours of operation. (301) 842-3474. Might take a few tries on the phone. If they're busy, they don't answer.
If you've never been there, it might be worth the trip. Pretty impressive.
This is just one building of several
Posts: 10,279
Threads: 1
Joined: Nov 2001
Location: Prince Frederick, MD
Hicksville Mill is where I go to get all my lumber. It's two hours away, but half the price of local so it's worth the trip, especially when I buy a few hundred bf at a time.
I'll head out his way to get the stock for this and pick up lumber for the next table.
Semper fi,
Brad