Woodnet Forums › › Active › Woodworking Power Tools v
Brand new Clearvue cyclone won't start, wiring question
Thread Modes
Brand new Clearvue cyclone won't start, wiring question
fredhargis Offline
Member
Posts: 12,601
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
#21
06-03-2023, 04:45 AM
I should added to my post above, please keep us posted on the resolution.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Find
Reply
Lumber Yard® Offline
Member
Posts: 11,666
Threads: 0
Joined: Dec 2006
#22
06-03-2023, 10:38 AM
(06-01-2023, 02:25 PM)davco Wrote: Some progress

An electrician stopped by and determined that I did not have the double pole breaker in the correct AB slot.

So now it starts, but the breaker flips after 5 seconds consistently.

I reached in and turned the impeller by hand, half of the rotation it glides, the other 180 it feels like it's binding.  Is that normal?

Glad you figured out the wiring and breaker stuff. The impeller should rotate freely when powered off so the binding you are feeling is why the breaker is now tripping. There really isn't much left to do than try and determine what is binding. Motor or impeller must have something going on. 
Wink
2024-2025 NFL Pick 'em
Group ID#: 21276
Group Password IBTP
Find
Reply
iclark Offline
Moderator
Posts: 14,849
Threads: 10
Joined: Jan 2010
Location: southeastern VA
#23
06-04-2023, 11:23 PM
I cannot find where you tried talking to Clearvue tech support.

Do they not support their products?
"the most important safety feature on any tool is the one between your ears." - Ken Vick

A wish for you all:  May you keep buying green bananas.
Find
Reply
davco Offline
Member
Posts: 1,067
Threads: 0
Joined: Dec 2006
#24
06-05-2023, 09:37 AM (This post was last modified: 06-06-2023, 04:49 PM by davco.)
I am talking to them too, just reality checking with fellow CV users

Update from today, CV is sending me a new motor
Find
Reply
davco Offline
Member
Posts: 1,067
Threads: 0
Joined: Dec 2006
#25
06-10-2023, 09:17 AM
New motor fixed the cyclone!
Find
Reply
FrankAtl Offline
Random doodad artist
Posts: 3,116
Threads: 0
Joined: Oct 2007
Location: Cumming, GA.
#26
06-10-2023, 10:49 AM
Glad you got it fixed. I wouldn't bother ever calling that Baldor motor shop again. What a BS answer!

Frank
Find
Reply
fredhargis Offline
Member
Posts: 12,601
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
#27
06-11-2023, 05:23 AM
Same here, glad it's running.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Find
Reply
MarkSingleton Offline
Member
Posts: 5,182
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
#28
06-14-2023, 05:47 PM
Great news. Always good to hear about good customer service.
Mark Singleton

Bene vivendo est optimum vindictae


The Laws of Physics do not care about your Politics   -  Me
Find
Reply
davco Offline
Member
Posts: 1,067
Threads: 0
Joined: Dec 2006
#29
06-15-2023, 12:59 PM (This post was last modified: 06-15-2023, 04:27 PM by davco.)
All's well that ends well:

https://youtu.be/yCaC_GAUyXk

Had to build a custom low profile bin, because I have 7 foot high ceilings. My home built fill sensor just worked too.
Find
Reply
kurt18947 Offline
Member
Posts: 1,687
Threads: 0
Joined: Apr 2005
#30
06-18-2023, 07:03 PM (This post was last modified: 06-18-2023, 07:03 PM by kurt18947.)
(06-15-2023, 12:59 PM)davco Wrote: All's well that ends well:

https://youtu.be/yCaC_GAUyXk

Had to build a custom low profile bin, because I have 7 foot high ceilings. My home built fill sensor just worked too.

Thanks for the video. If I were to get a cyclone, I'd get the clear plastic one. I think watching it do its thing is neat, but then I'm easily entertained
Crazy. And yeah, put that motor shop on your "Do Not Use" list.
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.