Posts: 13,930
Threads: 0
Joined: Apr 2002
Location: Texas
So most of the interior wood trim (base boards door ways etc) has oil based paint on it.
Is there a paint that makes repainting easier now? Really dont want to use oil based again. Quick drying easy clean up would be great
Or am I dreaming?
Posts: 12,884
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(06-27-2023, 08:14 AM)Wipedout Wrote: So most of the interior wood trim (base boards door ways etc) has oil based paint on it.
Is there a paint that makes repainting easier now? Really dont want to use oil based again. Quick drying easy clean up would be great
Or am I dreaming?
You can apply latex paint over any base. Of course, adhesion is always a concern, so prep. is important. First, clean it really well, then sand it lightly to remove any gloss and nibs. The sanding will reveal any dents and you can decide whether or not to fill them. The best job will result from using a bonding primer before applying the paint of your choice.
Seal-Grip bonding primer by PPG works really well over oil based paint, and is available at HD. For topcoat, my personal choice is SW's ProClassic Acrylic. Goes on great with a brush, flows out nicely, dries quickly, and is pretty durable. Even easier to apply is SW's Emerald Urethane Trim Enamel, but it takes a lot longer to dry and cure.
John
Posts: 24,051
Threads: 0
Joined: Jan 2004
Latex can cover oil base.
Matt
If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason.
-Jack Handy
Posts: 64,677
Threads: 3
Joined: Feb 2007
Location: Merryland
Wash it and then sand it or scuff it with red ScotchBrite. Pet peeve of mine.. lack of prep. Every layer of paint over dirt just keeps getting uglier.
Posts: 12,046
Threads: 1,611
Joined: Jan 2001
Location: Kansas City, Kansas
Easiest and fastest way is to cover with shellac based primer, then paint.
No need to sand and you can tint the primer to the final coat color.
Posts: 4,676
Threads: 0
Joined: Jan 2007
The last time I used shellac based primer I thought my house was going to explode. Wow! Even with windows open that is some strong smelling stuff.
Any free advice given is worth double price paid.
Posts: 12,884
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(07-01-2023, 09:36 AM)Woodenfish Wrote: The last time I used shellac based primer I thought my house was going to explode. Wow! Even with windows open that is some strong smelling stuff.
It's just alcohol. Not to worry.
John
Posts: 21,881
Threads: 0
Joined: Oct 2003
(06-29-2023, 05:45 PM)K. L. McReynolds Wrote: No need to sand…
How can say this without seeing what he has.
When refinishing after others, I’d say I’ve never seen old paint that didn’t need sanding before being repainted because the previous work looked like crap!
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 18,967
Threads: 0
Joined: Jul 2002
Location: Ohio
Just so we're all on the same page here: latex over oil is fine. Oil over latex is NOT good, right? The latex needs to pass moisture that the oil-based paint will seal in as I understand it.
Posts: 769
Threads: 0
Joined: Jan 2007
Location: ATL
(07-02-2023, 10:13 AM)Gary G™ Wrote: How can say this without seeing what he has.
When refinishing after others, I’d say I’ve never seen old paint that didn’t need sanding before being repainted because the previous work looked like crap!
The sanding is to promote adhesion in this case as much as to smooth out any flaws. Latex will peel off really easy if it doesn’t have anything to bond to……….like a smooth , non-porous molding.
