Shop clearance items
#9
One of the nice things about moving (maybe the ONLY nice thing!) is that you get to see items that you almost never use.
So it is time to cull the herd!

220 Volt heater purchased at Menards.  Used just this last heating season until I got the Mini-split hooked up.

https://www.menards.com/main/heating-coo...&exp=false

$60 plus shipping

   

   

Two Shop Fox Press Screws.  Used once!

https://www.amazon.com/Shop-Fox-D2893-Pr...172&sr=8-1

$25 plus shipping

   

Woodcraft Four Way Panel Clamps

I have three sets of these plus a setup that I made that can clamp a panel about 36" x 44".  The retail total would be $134. 97 plus tax not including the homemade rack.
I even upgraded the clamps by replacing the weak plastic blocks with steel square tube.

https://www.woodcraft.com/products/woodr...ing-system

$100.00 plus shipping
Shipping with the rack would be difficult so either ship without rack or just shipping the clamp parts.

   

   

A roll of 12" blue masking tape.  VERY little used.  I tried it as a mask to rout through for my CNC but it didn't really work on precise work.

https://www.amazon.com/Painters-Yards-Pr...hdGY&psc=1

$20 plus shipping

   

Lastly, I have a Jet Air Cleaner.  I do NOT have the remote.
The tape residue is from a corner I tape on in my old shop to keep me from hitting my head!

Retails for around $350 new and once again, shipping could be an issue.

How about $125

   

   

And if whoever buys 2 or more items, I will give them this vise.

   

All prices are negotiable especially if you buy several items!!

Thanks,

Toney
Reply
#10
Hey Toney--I'd like those press screws if available. Mailing is to La Porte, IN--unless you're coming north in the next week or so. PM coming.
earl
Reply
#11
Press screws are sold!

Thanks Earl.
Reply
#12
Saturday bump.

No further interest?
Reply
#13
I will accept any reasonable offers.
Reply
#14
Ok,  I will take unreasonable offers!!
Big Grin   I just want to move these items.

I also have two Reznor natural gas hanging heaters if there would be any interest in those.
Reply
#15
Good stuff!!!  Sorry no need. 

I have several of the panel clamps and can highly recommend them, especially at this price point.  The similar Woodpeckers are in the hundreds. 

I assume the shop heaters are nice, but in South FL we need A/C even in winter. 

My shop has 2 of the Jet Air cleaners. Wouldn't work without them!



Good Luck with the sales
Reply
#16
(07-25-2023, 06:58 AM)taxman Wrote: Good stuff!!!  Sorry no need. 

I have several of the panel clamps and can highly recommend them, especially at this price point.  The similar Woodpeckers are in the hundreds. 

I assume the shop heaters are nice, but in South FL we need A/C even in winter. 

My shop has 2 of the Jet Air cleaners. Wouldn't work without them!



Good Luck with the sales

Thanks, Craigslist is not being productive either.

Pretty close to taking it all to a local charity!
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.