Posts: 11,717
Threads: 0
Joined: Jan 2005
Location: North Central Illinois
Working on new legs for a couch that is being reupholstered
They will show so I am giving them a bit of craftsman flair to go with the rest of the house.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
12-26-2023, 07:31 PM
Lookin good there Greg.
![[Image: yellowyes.gif]](https://forums.woodnet.net/images/graemlins/yellowyes.gif)
Temporarily lost my main bench, as the wife needed a bigger table. She's making a winter engine cover for son #2's new (to him) airplane he bought a couple of months ago.
In the meantime, I'm cutting down a small no frills cabinets I made close to 40 years ago to set on the shop counter.
I'll finish it up and maybe throw some flat paint on it later on. I'm still re-arranging this corner.
.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 11,717
Threads: 0
Joined: Jan 2005
Location: North Central Illinois
Good repurpose.
I like coming up with solutions for a more efficient shop.
Either that or I need to make room for more stuff
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
12-27-2023, 03:34 PM
I need more interior walls for wall cabinets and being able to hang more shirt up.
She let me use the end of the bench today.
![[Image: smirk.gif]](https://forums.woodnet.net/images/graemlins/smirk.gif)
Corner is coming along. Got my standup desk back.
.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 11,717
Threads: 0
Joined: Jan 2005
Location: North Central Illinois
I suffer the same fate.
I could use more wall/cabinet space.
That would really help with organizing
Posts: 11,717
Threads: 0
Joined: Jan 2005
Location: North Central Illinois
Eight new couch legs made from quartersawn white oak.
An example of one of the old legs included.
The old legs were hidden by a ruffle along the bottom of the couch.
New version has no ruffle and the legs will be visible.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Good job. They look heavy duty
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
12-31-2023, 06:51 PM
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
01-01-2024, 02:58 PM
(This post was last modified: 01-01-2024, 03:03 PM by Stwood_.)
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 4,266
Threads: 0
Joined: Feb 2001
This was taken the first part of Dec. It is to cold to work wood, but not to cold to straighten up and get ready for the first part of April. I decided to move bench from the middle of the shop to about 4 feet from a side wall.
Usually the top is not this bad but moving it took some work. The top is 4 inch thick Hickory and is 8 foot long and 30 inches wide. I had to use a fulcrum just to get it up on detachable wheels. It took about 15 minutes to actually turn the bench 90 degrees and place it where I wanted it.
PS: it has come a long way since then but I didn't get it totally cleaned of before it got to cold.
Tom
