Posts: 4,266
Threads: 0
Joined: Feb 2001
I have a Wards Master #7 for sale. I was my user until I got the Keen Kutter K7C. I have been using it for a couple of years so it is not fresh off from the grinder. Montgomery Wards was a department store in my days and it was sold as their house brand. The plane was made by Stanley and it is an earlier version because of the solid face and close fit at the front of the frog. The knob and tote are solid but show some wear and tear. They could stand refinishing but it was my daily user. The sides have been ground square with the bottom and the bottom is as flat as any plane on the market.
One picture is of the plane completely disassembled, so you know everything is in working order. Asking $165 plus shipping. I will have to find out about the shipping cost.
Anyway pictures are worth a 1000 words so here they are.
Thanks for looking
Tom
Posts: 1,500
Threads: 0
Joined: Feb 2007
Hi Tom,
would you ship to germany?
Cheers
Pedder
Posts: 12,604
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
You might want to send Tom a PM in case he's missed your question.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 4,266
Threads: 0
Joined: Feb 2001
03-27-2024, 02:00 PM
(This post was last modified: 03-27-2024, 02:42 PM by tablesawtom.)
Yes, I will ship to Germany if you wish to pay the shipping. But I have a better deal coming in a couple of days and that is a Bedrock 608C for $275 plus shipping. The shipping should be about the same.
Tom
Posts: 1,500
Threads: 0
Joined: Feb 2007
(03-27-2024, 02:00 PM)tablesawtom Wrote: Yes, I will ship to Germany if you wish to pay the shipping. But I have a better deal coming in a couple of days and that is a Bedrock 608C for $275 plus shipping. The shipping should be about the same.
Tom
Hm. I have to think about it. Could you guess the shipping costs to germany?
take care
pedder
Posts: 4,266
Threads: 0
Joined: Feb 2001
(03-28-2024, 01:27 AM)Pedder Wrote: Hm. I have to think about it. Could you guess the shipping costs to germany?
take care
pedder
I have no idea what it would cost. I shipped Derrick , in Australia, the hardware for a moxon vise and the shipping cost was $80. I would have to box it and make it ready for international shipment to find out the actual cost. And although I would love to do it, it is a lot of work and then have you decline to purchase. Truthfully, unless they are really rate over there, dollar for dollar, I don't think it is not that good of an investment for you.
Tom
Posts: 4,266
Threads: 0
Joined: Feb 2001
I have a Stanley Bailey 4 1/2 flat bottom plane for sale. As to what type I am not sure. It has 3 Patent dates which makes it either a 11 or 12, But both the knob and tote although made by Stanley are not original to the plane.
The blade was very badly pitted by the chip breaker, which is quite common. I replaced blade with precision ground a Keen Kutter blade that was made by Stanley. Other than the blade, tote and and knob all the parts are original to the plane. Totes brake, knobs split, and blades are replaced with aftermarket blades
Anyway the sides are ground square to the bottom and the bottom is flat within .001. I believe it was repainted before I got it, and it looks nice. The first picture is with it completely apart so you know everything works. It has a close fitting frog at the front making it one of the more desired planes Stanley made.
Asking $150 plus shipping. If you are looking for a 4 1/2 then you can not find a better one at this cost.
Again thanks for looking
tom
Posts: 64,652
Threads: 3
Joined: Feb 2007
Location: Merryland
03-29-2024, 08:20 AM
(This post was last modified: 03-29-2024, 08:22 AM by Snipe Hunter.)
I own a nice 4-1/2. I bought it because I don't have one and I rarely, if ever find them in the wild. Looks to be about the same vintage as yours. I didn't really think I'd use it much but it gets used quite a lot. Love the plane.
It was a at a yard sale with a lot of tools. I didn't see any planes and asked the guy if he had any. He took me in the garage and showed me a shelf with about 10 planes on it. The 4-1/2 caught my eye. I offered $150 for all of them and he bit. I kept the 4-1/2 and a 60 low angle. Boxed up everything else and sold the load on eBay for $150
That was about 15 years ago and I haven't seen another 4-1/2 since.
It pays to ask
Posts: 4,266
Threads: 0
Joined: Feb 2001
I thought I was posting a new item for sale and I wondered what happened to this. I was in reply and I thought I was in new post. Had to leave to go to a visitation so I didn't have tine to find out
Sorry for the confusion.
Tom
Posts: 1,500
Threads: 0
Joined: Feb 2007
04-01-2024, 02:31 AM
(This post was last modified: 04-04-2024, 12:47 PM by Pedder.)
pm sent to tom regarding the #7
Update: Tom and i agreed,m that I buy the K7 . So this plane is free.
