This is not a table laying upside down, but instead one side of what will eventually be a dresser with the top and bottom horizontal stretchers inserted. Because of the design of the drawers, I won't be able to attach a false front to the assembled drawer.. I will be using undermount full extension drawer slides which would normally be visible on the "bare" drawer without the false drawer front, but I've managed (or so I at least hope) to have the hardware completely out of site when completed. I'll find out later if my plan actually works. It's to be a Greene and Greene influenced piece where the ends of the drawer's sides are proud.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
