08-26-2024, 02:37 PM
Anyone done a Kilz Epoxy concrete floor?
My shop, formerly one-car garage, was painted by Jackson Pollock.
Parts have peeled albeit not enough!
It’s less than 400 SqFt.
Kilz says, “To recoat over an existing coating, remove any loose or peeling paint and scuff sand the surface. Use a product such as KILZ Concrete & Masonry Cleaner & Degreaser to clean previously coated surfaces in sound condition. Use a product such as KILZ Concrete & Masonry Cleaner & Etcher to clean and etch any bare concrete area.”
Then, roll on KILZ® 1-Part Epoxy Concrete & Garage Floor Paint.
Thoughts?
My shop, formerly one-car garage, was painted by Jackson Pollock.
Parts have peeled albeit not enough!
It’s less than 400 SqFt.
Kilz says, “To recoat over an existing coating, remove any loose or peeling paint and scuff sand the surface. Use a product such as KILZ Concrete & Masonry Cleaner & Degreaser to clean previously coated surfaces in sound condition. Use a product such as KILZ Concrete & Masonry Cleaner & Etcher to clean and etch any bare concrete area.”
Then, roll on KILZ® 1-Part Epoxy Concrete & Garage Floor Paint.
Thoughts?
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.