Posts: 4,812
Threads: 0
Joined: Apr 2005
Location: Macomb, OK
In case you've managed to dodge their spam, there's an interesting sale going on at Grizzly. There's all kinds of things. But they seem to be unloading a lot of Shop Fox tools for less money than their equivalent Grizzly models.
Some of the deals seem to be better than others. But there are a few that I thought were decent:
https://www.grizzly.com/products/shop-fo...dsaw/w1770
https://www.grizzly.com/products/grizzly...ead/g0454z
https://www.grizzly.com/products/shop-fo...aper/w1702
They even knocked $2000 off of the 16" jointer which I seriously considered, but still couldn't bring myself to spend $7000 on a jointer.
They have sales on and off throughout the year. And some of it is mark-it-up-to-mark-it-down for sure. But if you're tool shopping, this might be a reasonable time to pick something up.
brian
Posts: 12,858
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(08-29-2024, 05:02 PM)blanning Wrote: In case you've managed to dodge their spam, there's an interesting sale going on at Grizzly. There's all kinds of things. But they seem to be unloading a lot of Shop Fox tools for less money than their equivalent Grizzly models.
Some of the deals seem to be better than others. But there are a few that I thought were decent:
https://www.grizzly.com/products/shop-fo...dsaw/w1770
https://www.grizzly.com/products/grizzly...ead/g0454z
https://www.grizzly.com/products/shop-fo...aper/w1702
They even knocked $2000 off of the 16" jointer which I seriously considered, but still couldn't bring myself to spend $7000 on a jointer.
They have sales on and off throughout the year. And some of it is mark-it-up-to-mark-it-down for sure. But if you're tool shopping, this might be a reasonable time to pick something up.
brian
That is an outstanding price for the bandsaw, not much more than I paid for my 17" G0636X about 16 years ago. Construction looks the same, too, meaning very beefy, except it's larger. It looks like a fine saw at a great price for someone looking for a saw in that size range.
John
Posts: 4,812
Threads: 0
Joined: Apr 2005
Location: Macomb, OK
(08-30-2024, 08:15 AM)jteneyck Wrote: That is an outstanding price for the bandsaw, not much more than I paid for my 17" G0636X about 16 years ago. Construction looks the same, too, meaning very beefy, except it's larger. It looks like a fine saw at a great price for someone looking for a saw in that size range.
John
I bought it along with a few other things. I'll be picking it up tomorrow. We'll see how it goes.
Posts: 30,406
Threads: 1
Joined: Dec 2002
Location: DuPage County, Illinois, USA
That bandsaw is dreamy. What would make me pause is the power requirements. I'd have to maybe pull another circuit just for that tool.
Posts: 4,812
Threads: 0
Joined: Apr 2005
Location: Macomb, OK
(08-30-2024, 10:05 AM)Cian Wrote: That bandsaw is dreamy. What would make me pause is the power requirements. I'd have to maybe pull another circuit just for that tool.
I ran 100 amps to the shop building specifically so that I wouldn't fear 5hp tools. Even so, with the DC and A/C, I'm wondering whether I should have put 200amp service in. I have four adult children who want to use the shop also. So multiple machines running at the same time is a possibility.
Posts: 12,596
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
08-30-2024, 11:47 AM
(This post was last modified: 08-31-2024, 01:47 PM by fredhargis.)
That bandsaw caught my eye as well. I've been wanting a second one in the shop and following Marketplace but so far haven't seen anything. That's a little more than I was wanting to spend, but that's also more bandsaw than I was looking for; guess I have until the 3rd to decide.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 12,858
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(08-30-2024, 09:10 AM)blanning Wrote: I bought it along with a few other things. I'll be picking it up tomorrow. We'll see how it goes.
You're going to love that saw if you do any amount of resawing and/or veneer slicing. If so, put a Woodmaster CT on it, 1" x 1.3 tpi, and you'll be amazed how fast it cuts and how smooth the surface of the cut is.
John
Posts: 1,685
Threads: 0
Joined: Apr 2005
I was looking at the other band saws and noticed the 17" 2 HP saw had aluminum wheels. I wonder why they went with aluminum rather than cast iron. Do any other Griz 0513 series band saws come with aluminum wheels?
Posts: 4,812
Threads: 0
Joined: Apr 2005
Location: Macomb, OK
(09-01-2024, 07:13 PM)kurt18947 Wrote: I was looking at the other band saws and noticed the 17" 2 HP saw had aluminum wheels. I wonder why they went with aluminum rather than cast iron. Do any other Griz 0513 series band saws come with aluminum wheels?
I would guess it's just because it's cheaper so they can offer a lower price point. I think aluminum wheels are probably fine for the smaller saws. But cast iron is always better.
Right now they have two 20" disk sanders for sale on their site. One is variable speed, and the other isn't, both the same price. This seemed odd to me so I scoured the specifications trying to figure out why the variable speed model wasn't more money. On the fixed speed model, there's a sentence that says the platen is cast iron. But the variable speed model doesn't mention it at all. So I have to conclude that the variable model has an aluminum platen.
About a year ago, I nearly bought a used powermatic 12" disk sander. But I decided against it when I saw that the platen was bent. I'm not sure how hard they had to hit it to get it to bend like that. But that turned me off of aluminum. I ended up buying the fixed speed model with the CI platen.
I think for bandsaws, CI wheels are heavier which translates into more momentum, which I suspect translates into better performance under load, since the wheels would act like flywheels.
Posts: 12,858
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(09-01-2024, 08:56 PM)blanning Wrote: I would guess it's just because it's cheaper so they can offer a lower price point. I think aluminum wheels are probably fine for the smaller saws. But cast iron is always better.
Right now they have two 20" disk sanders for sale on their site. One is variable speed, and the other isn't, both the same price. This seemed odd to me so I scoured the specifications trying to figure out why the variable speed model wasn't more money. On the fixed speed model, there's a sentence that says the platen is cast iron. But the variable speed model doesn't mention it at all. So I have to conclude that the variable model has an aluminum platen.
About a year ago, I nearly bought a used powermatic 12" disk sander. But I decided against it when I saw that the platen was bent. I'm not sure how hard they had to hit it to get it to bend like that. But that turned me off of aluminum. I ended up buying the fixed speed model with the CI platen.
I think for bandsaws, CI wheels are heavier which translates into more momentum, which I suspect translates into better performance under load, since the wheels would act like flywheels.
Exactly right. Minimax even calls the cast iron wheels on their saws flywheels. And this a reason larger saws have better performance than smaller ones. Momentum increases with the square of the radius, so large wheels are affected less than smaller ones by changes in wood density, grain, etc.
John
|
