09-10-2024, 01:43 PM
(This post was last modified: 09-10-2024, 01:44 PM by Splinterz25.)
"Xerxes Decanter"
This piece is made from Canarywood, Padauk and Blackwood. The finished size is 14" x 24" x 4" most parts are first turned on the lathe then assembled. The final finish is Deft sanding sealer. This piece could pour liquid if lined with resin. the neck, handle and spout were sliced and two thin strips of Padauk were added to each for a detail.
This piece is made from Canarywood, Padauk and Blackwood. The finished size is 14" x 24" x 4" most parts are first turned on the lathe then assembled. The final finish is Deft sanding sealer. This piece could pour liquid if lined with resin. the neck, handle and spout were sliced and two thin strips of Padauk were added to each for a detail.
Jack Of All Master Of None
https://www.facebook.com/serenityartisans/
My 16' Cedar Canoe build http://www.clcboats.com/forum/clcforum/t...28426.html
https://www.facebook.com/serenityartisans/
My 16' Cedar Canoe build http://www.clcboats.com/forum/clcforum/t...28426.html