Laser level??

[Cabinet Monkey]

It was out 1/16 at 1 foot.  I did find a low spot in a concrete floor with a water level.  You just tape it to a story pole and go around and see where it is lower

again

    you mentioned 1/64th in the orig. posting. Now we're 1/16.   Were we 1/64/ft. before or ?????


Water tube plus story pole will reveal the low/high points , but it's a cumbersome and SLOOOOOOOOOW process.


I suppose if you're just lookin to maintain your top tier status in the skinflint society - a tube and a stick will keep you there longer than a laser level will.  It's not what I would advise someone asking for advise to use.  But , you carry on.

[fixtureman]

again

    you mentioned 1/64th in the orig. posting. Now we're 1/16.   Were we 1/64/ft. before or ?????


Water tube plus story pole will reveal the low/high points , but it's a cumbersome and SLOOOOOOOOOW process.


I suppose if you're just lookin to maintain your top tier status in the skinflint society - a tube and a stick will keep you there longer than a laser level will.  It's not what I would advise someone asking for advise to use.  But , you carry on.

I have had a laser for more years rgen most peoplr here I got mine back in 1992 and it cost me $1200 so I don;t think U am a  skinflint