Posts: 2,722
Threads: 0
Joined: Dec 2005
Here's something I came across recently that may be the answer to a problem I've had in the shop forever: not enough room to store things. I have a particular issue storing backsaws. I'm not a fan of traditional saw tills: they get the job done but it's not always easy to distinguish one saw from another. This device, sold by Blue Spruce Tools, is called a backsaw holster. It's made of metal and has a slot for the saw plate and spine. As you can see from the pictures: it's an easy add-on item that holds the saw securely and lets you see the entire saw.
![[Image: temp-Imagezf-MHHK.avif]](https://i.postimg.cc/5tRjGNb3/temp-Imagezf-MHHK.avif)
" />
![[Image: temp-Image-Obw-Bj3.avif]](https://i.postimg.cc/15hVst67/temp-Image-Obw-Bj3.avif)
" />
Blue Spruce Backsaw Holster
Posts: 1,500
Threads: 0
Joined: Feb 2007
That is a clever Idea, thanks for Sharing, Phil. Not sure how it would damage our oval spines.
Take Care
Pedder
Posts: 4,333
Threads: 0
Joined: Dec 2006
Location: On my own Ignore List
(11-18-2024, 03:03 PM)Pedder Wrote: That is a clever Idea, thanks for Sharing, Phil. Not sure how it would damage our oval spines.
Take Care
Pedder
It's simple, clean and inexpensive, but its requires plenty of space in a cabinet to slide the saw laterally through the bracket. This means that a short saws effectively take the same space as a longer saw using a hook-style bracket.
Posts: 10,717
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
That's an interesting device. I like the Blue Spruce Logo cutouts on the holster. I think I'd prefer plastic over metal to prevent any potential scratching of the spine and saw plate. It does consume a lot of real estate, so that's a consideration for those for whom space is limited.
Still Learning,
Allan Hill
Posts: 1,500
Threads: 0
Joined: Feb 2007
I think it's for the lid of a dutch tool chest or simliar oaccasions.
take care
Pedder
Posts: 2,722
Threads: 0
Joined: Dec 2005
Pedder: point taken: I think some masking tape applied to the edge of the slot would help in this regard.
All: this holster holds the saw in a more or less horizontal position but it does not grab the saw in any way: the saw can easily slide forward and backward. I am not sure it would work on the lid of a tool box unless the box were completely stationary, and even then the saw would not be secure when lifting the lid.
This device could be modified by adding a couple of magnets to grab the saw plate. I may investigate that.
Phil
Posts: 200
Threads: 0
Joined: Oct 2009
11-20-2024, 01:05 PM
(This post was last modified: 11-20-2024, 01:05 PM by nodima.)
Gotta love the marketing there.
1. Invent a "problem"
2. instill fear in people who won't question years of history and saw storage
3. sell a solution for it.
Classic.
