Posts: 6,139
Threads: 1
Joined: Nov 2006
Hi Y'all
After a year off, I've started working in the shop again, this time with hardly any electrons. I'm making a bathroom cabinet, which will be painted, so exact precision is not necessary. Never knew how much I would miss my table saw, so for my birthday tomorrow, my fiance' just bought me a LN #51 shooting plane!
Now I need a shooting board, would love to see some ideas on how I will build my own.
Photos are welcome, other instructions or links would be appreciated.
Thanks in advance!
Posts: 6,674
Threads: 1
Joined: Jan 2003
Location: Southern California
Does not do miters, does have adjustable fence. 
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
 Since this photo was taken, I've built a donkey's ear attachment for this board that attaches against the fence with the shoulder bolt you see in the foreground. Hank
Posts: 2,766
Threads: 0
Joined: Oct 2012
Location: W. of Rainier, E. of Orcas
[blockquote]Danny in Houston said:
I'm making a bathroom cabinet, which will be painted, so exact precision is not necessary. Having painted previously shop made cabinets, I know, for a fact, that painting highlights every flaw, every crack, every rough stretch, *everything* in brilliant accentuation. Make it look cheap ghetto amateur--no squares, and freehand--or you will literally go crazy.... I know...   Throw away the shooting board, this time.
Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
OK, I'll bite. WTH is a "shooting board"?
Posts: 6,674
Threads: 1
Joined: Jan 2003
Location: Southern California
hbmcc said:
[blockquote]Danny in Houston said:
I'm making a bathroom cabinet, which will be painted, so exact precision is not necessary.
Having painted previously shop made cabinets, I know, for a fact, that painting highlights every flaw, every crack, every rough stretch, *everything* in brilliant accentuation. Make it look cheap ghetto amateur--no squares, and freehand--or you will literally go crazy.... I know...
Throw away the shooting board, this time.
Since he needs precision, I would think the shooting board would give him more, not less.
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
Posts: 666
Threads: 0
Joined: May 2011
Herb G said:
OK, I'll bite. WTH is a "shooting board"?
A "shooting board" (sometimes written "chuting board") is a jig which holds a workpiece at a right (or other pre-determined) angle and has a track ("chute") in which a plane, used on it's side, rides. Its purpose is to allow the accurate planing of end or edge grain, following rough cutting.
Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
Joe Bailey said:
[blockquote]Herb G said:
OK, I'll bite. WTH is a "shooting board"?
A "shooting board" (sometimes written "chuting board") is a jig which holds a workpiece at a right (or other pre-determined) angle and has a track ("chute") in which a plane, used on it's side, rides. Its purpose is to allow the accurate planing of end or edge grain, following rough cutting.
[/blockquote] Thanks. 
Posts: 6,938
Threads: 0
Joined: Aug 2004
Location: Perth, Australia
Danny in Houston said:
Hi Y'all
After a year off, I've started working in the shop again, this time with hardly any electrons. I'm making a bathroom cabinet, which will be painted, so exact precision is not necessary. Never knew how much I would miss my table saw, so for my birthday tomorrow, my fiance' just bought me a LN #51 shooting plane!
Now I need a shooting board, would love to see some ideas on how I will build my own.
Photos are welcome, other instructions or links would be appreciated.
Thanks in advance!
Hi Danny For the #51, which has a skewed blade, I would build a flat board, such as Curt's. If purchasing one, Rob Hansen (Evenfall) makes an excellent version. The skewed blade is not ideal for a ramped board, which will counter the effect of the skew to a small degree. Of course, if you can find one, a Stanley #52 would be your grail shooting board ...    Regards from Perth Derek
Posts: 2,258
Threads: 0
Joined: Dec 2007
I am an advocate of keeping it simple. Forget about fancy adjustment mechanisms. And if you want a 90 degree board plus a mitering board, it is easier and a lot quicker to make two simple ones, then to try to adapt one for both tasks. Here's a video showing how you can make a simple one. I've posted this before  web page
|
