Posts: 1,076
Threads: 0
Joined: Dec 2004
I installed a power vent water heater. I vented it through the wall. The last thing I have to do is put on a flange/collar on the outside wall siding. I cannot find anything that will fit over a 2" PVC pipe. What am I missing here? What are these things called.
Thanks,
Tommy
Posts: 13,084
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Posts: 29,874
Threads: 0
Joined: Jan 2008
Location: Mid-MI
Vinyl mounting block... I didn't see anything for 2" PVC. I'm guessing you'll need to drill it out yourself.
Mark
I'm no expert, unlike everybody else here - Busdrver
Nah...I like you, young feller...You remind me of my son... Timberwolf 03/27/12
Here's a fact: Benghazi is a Pub Legend... CharlieD 04/19/15
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
This is what's on mine, and the sealed furnace too for that matter. Intake and exhaust in one trim, though side-by-side PVC pipe, not coaxial metal.
Linky-dink
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 741
Threads: 0
Joined: Mar 2006
All I've ever used is silicone. Cut a correct sized hole through the siding, slide the pipe in and silicone around it.
Posts: 1,076
Threads: 0
Joined: Dec 2004
CUt the correct size hole, are you crazy???? Well actually, I would have loved if it worked out that way, but I was drilling through 13" of masonry and the vinyl siding took a hit on a cold day... need an escutcheon of some sort.
Thanks for the info guys.
Tommy