Posts: 1,808
Threads: 0
Joined: Dec 2000
I've searched for the cutting board video that I saw posted here a while back and can't find it. It's the one where the guy builds the board, bandsaws a curve through it, routes that and glues strips of complimenting wood in it, glues it up then repeats the cutting of curves and gluing strips in it.
Can anyone point me in the right direction.
Gary
Living under the radar, heading for "off the grid."
Posts: 2,172
Threads: 0
Joined: Feb 2007
If it wasn't for last minute, nothing would get done.
Visit my site for project pics and videos:
dlgwoodwork.com
Posts: 939
Threads: 0
Joined: Feb 2005
Location: San Diego, CA
OOPS ... just re-read the original post. The one referenced below is not the one you are looking for. Sorry
do a search w/in woodnet for a recent Drunken Cutting Board post (12/4)... there is a link to a video that sounds like what you described. If you cannot find the thread, PM me and I will send you the link (I do not know how to cross-reference the thread in this a post)
-Brian
Posts: 8,334
Threads: 0
Joined: Sep 2004
Location: Morris County, NJ
Posts: 1,560
Threads: 0
Joined: Nov 2005
Location: Mid, MI.
Posts: 12,001
Threads: 1,611
Joined: Jan 2001
Location: Kansas City, Kansas
One I did--video is about 6 posts down
here
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
I was thinking the earliest one was an
MTMwood creation, but I couldn't find it there. I went searching my drives and it was made by Rick Koorman I think this is what you want. I like his videos, very instructive, and great tunes
https://www.youtube.com/watch?v=Fyxzi3ElNbU
Worst thing they can do is cook ya and eat ya
GW
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Mac, check your linkie. I'm getting "about blank"
Worst thing they can do is cook ya and eat ya
GW
Posts: 1,808
Threads: 0
Joined: Dec 2000
Yep, this is the one.
Thanks,
Gary
Living under the radar, heading for "off the grid."