Posts: 196
Threads: 0
Joined: Oct 2009
I've recently become enamored with the floating table top concept, and on the list is building a new kitchen table, once my daughter is old enough to stop damaging it. I'm thinking that it would be a good way to scratch that itch.
In looking around for ideas and inspiration, it seems that the vast majority of these are either hallway tables, or coffee tables. Is there something I'm missing where a floating top table is a bad idea in the widths commonly used for a kitchen table?
Posts: 3,066
Threads: 0
Joined: Jan 2004
Well, you are sitting at a dining table so leg room and table height demand an efficient use of the space above your thighs. Floating tops tend to use more of that space, so maybe that is why you do not see them on tables to be used for dining. Maybe you can design around this fact, but I see it as your main challenge.
Posts: 2,272
Threads: 0
Joined: May 2002
Here are a couple of floaters I made, I think either design could transfer over to a dinning table.
https://timberwerks.wordpress.com/2014/0...fee-table/http://design-milk.com/autumn-hall-table/
Posts: 12,667
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Lots of examples on Google. It's been done.
John
Posts: 196
Threads: 0
Joined: Oct 2009
Thanks all - I had looked at Google, and even when specifying kitchen or dining, it still showed mostly coffee tables.
The leg clearance is definitely something to keep in mind. Thanks again.
Posts: 12,667
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Google "floating top dining table".
John
