Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
Bought a Delta 37-315 without a motor a year ago and finally got time to rehab it.
School shop veteran, three or four layers of paint (last one may have been latex house paint, rolled on
) but worth saving.
Picked up a Shelix head from the factory (30 miles away) Got it installed.
Stripped, wirebrushed, sanded, polished, waxed, reassembled and finally got the power to it.
And it ran backwards.
Working on the motor was so much easier when all the cast iron parts were off.
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 5,360
Threads: 0
Joined: Nov 2008
Easy fix...you put the belt on backwards...
Bob
Posts: 2,500
Threads: 0
Joined: Oct 2005
You know the rules!!!!!
"There is no such thing as stupid questions, just stupid people"
Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
Swapped T5 and T8 and made a bunch of shavings
Now to find a switch and get it installed.
And get that oak dried down from 12%
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 9,541
Threads: 0
Joined: Jan 2005
Location: Orlando FL
I had that problem with a band saw. TDPKE (sp?) told me the I needed to rotate the center part of the motor to reverse the rotation. Worked like a charm. If you have a cast iron motor it might be all you have to do as well.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Worst thing they can do is cook ya and eat ya
GW
Posts: 3,390
Threads: 1
Joined: Jan 2002
Dang what a power cord! What are you running in that thing? (Or is it just a picture illusion?"
-Marc
Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
It's just what I had laying around
Bought some heaters for scrap at a auction and they all used those big cords.
Don't have to worry about no overloads
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 6,107
Threads: 0
Joined: Jan 2006
Location: Central Kentucky
Were you able to buy the shelix directly from Byrd?
I am thinking about upgrading if I can divert some $ to my tool fund.
Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
Here's what the paint looked like when I started.
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
I think it was here