5 Cut Method
#4
I put a new sacrificial fence on my Incra Express/1000SE sled. Gave me a chance to try the 5 cut method to align it to the blade. Followed this guys link:
http://valleywoodworkers.org/wp-content/...Square.pdf
Very nice, feeler guages, who knew? Sled is now way more square than is necessary for wood.
Just truing up all my machines for making new kitchen cabs.
Saratoga, NY
Reply
#5
I used this method last weekend for a small crosscut sled. Some test cuts were .0002" error ratio.

Making a new large sled soon and will use the same procedure.

Mike
Reply
#6
the William being referenced is William Ng. He shows the 5 cut along the way to building a very accurate sled in this video.

https://www.youtube.com/watch?v=UbG-n--LFgQ

Though I believe the 5 cut was around before William was a zygote
Worst thing they can do is cook ya and eat ya

GW
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.