Dewalt MBF Radial Arm Saw Reduced to $75
#11
Nice Dewalt MBF, 9" radial arm saw. Very nice condition. This 9" saw cuts deeper than a lot of 10" saws.


" />
Reply
#12
Very nice looking saw for the money--looks like the original maple top. If you decide to come up I-65 to northern IN, let me know!! I've recently put an old (1958) GWI in service--when well tuned these are incredible machines. You're right about depth of cut also--that flat-bottomed motor design helps a lot.

Good luck,
earl
Reply
#13
How wide a 4/4 board can it cut?
"Truth is a highway leading to freedom"  --Kris Kristofferson

Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Reply
#14
I am pretty sure mine is the same and it will cut 16" to 18" wide and up to 4" thick.

Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#15
About 13".

John
Reply
#16
Arlin & John are both right. With the standard table configuration, 13", and by moving the fence behind the narrow back table you add the width of the back table (in my case either 2" or 3 1/2" depending on which back table i'm using. I'd max out at about 17" on my GWI. But double that is easy to do as well...with a good stop in place and the saw well set--flip the work piece to finish the cut. I did 24" wide plywood a few weeks ago. No problem at all.

earl
Reply
#17
Those are great saws my Father - in - Law had one and one of my Brother - in - Laws has it now.


Steve
Reply
#18
greenacres2 said:


Arlin & John are both right. With the standard table configuration, 13", and by moving the fence behind the narrow back table you add the width of the back table (in my case either 2" or 3 1/2" depending on which back table i'm using. I'd max out at about 17" on my GWI. But double that is easy to do as well...with a good stop in place and the saw well set--flip the work piece to finish the cut. I did 24" wide plywood a few weeks ago. No problem at all.

earl





Now Earl knows what he is talking about and he sent me a book about the RAS and Mr Sawdust who make it famous.

I do not remember the link to the book but it is well worth it and I am only half way through and it tells everything about it including zeroing it all in to perfection at all points. It also tells about all the different sizes and lengths of the arms that were made for them too.

Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#19
Still for sale.
Also have a 10" Red Star ras for sale for $100 also.
Both great saws
I long for the days when Coke was a soft drink, and Black and Decker was a quality tool.
Happiness is a snipe free planer
Reply
#20
Just had some friends drive up from St. Pete for a wedding 2 weeks ago...if i'd have been thinking, i'd have tried to impose on them for a delivery.

Hope you sell both before the end of the year, as we'll probably come down that way in January again. I'd rather fly, but for the MBF or Red Star, i'd consider driving!!

earl
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.