Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
If you want to keep glue out of your pen tubes when assembling them, twist them in some paraffin before inserting them into the blanks.
I found some paraffin at my local grocery store the other day for $3.59 a pound.
It should last me several 100's of pens.
It comes a little thick, so you probably will need to melt it down in a cheapo aluminum pan to about 1/8" thick.
You only need enough to seal the end off.
Once the glue is dry, use a chopstick to poke out the paraffin. A lot of people use dental wax, but that stuff is way too expensive.
Posts: 10,208
Threads: 0
Joined: Mar 2001
Just cut a slice of potato about a 1/4 inch thick. Use your tube like a cookie cutter and you get a plug for each end of the tube and your done.
Al
Some people are like a Slinky. Not really good for anything but still bring a smile to your face when you push them down a flight of stairs.
A dead enemy is a peaceful enemy. Blessed are the peacemakers.
Posts: 1,792
Threads: 0
Joined: Dec 2005
Location: Jacksonville, NC
I use silly putty but potato, paraffin wax will also work great!
Use a dowel to push out putty out the tube & rifle bore brush to clean the tube before turning.
I do use Gulf Canning (paraffin wax) as an end sealer. Need a hot plate, frying pan, and old pot depending upon size of blank.
Bill
Posts: 27,980
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
Or don't do anything. I keep my old chainsaw files and these are perfect for getting the glue out of the tubes. Takes me about five seconds to clean a tube.
VH07V
Posts: 6,423
Threads: 0
Joined: Feb 2002
Location: Truro,N.S. Canada
EightFingers said:
Or don't do anything. I keep my old chainsaw files and these are perfect for getting the glue out of the tubes. Takes me about five seconds to clean a tube.
Been turning pens for over 10 years and have never plugged the ends. Do as you do, use an old chainsaw file.
Mel
ABC(Anything But Crapsman)club member
