Posts: 3,390
Threads: 1
Joined: Jan 2002
I'm thinking about getting a phase converter so I can capitalize on all these old 3 phase machines selling for much cheaper than 1 phase. But I know absolutely nothing about them other than they're more expensive than I thought!
If I wanted to power a 5hp saw I'd need a 7.5hp phase converter, correct? Converter just plugs into regular 220v outlet and machine plugs into converter?
-Marc
Posts: 3,217
Threads: 0
Joined: Jan 2006
Buy yourself a VFD. Much cheaper and it will give you variable speed.
Posts: 333
Threads: 0
Joined: Apr 2005
Dave Diaman said:
Buy yourself a VFD. Much cheaper and it will give you variable speed.
A VFD is a good choice, but you would need one for each machine, and they get quite expensive for motors larger than 3hp. If you want to power multiple three-phase machines, then a rotary phase converter is the best choice. You might browse the archive over at owwm.org for more information.
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
WaterlooMarc said:
I'm thinking about getting a phase converter so I can capitalize on all these old 3 phase machines selling for much cheaper than 1 phase. But I know absolutely nothing about them other than they're more expensive than I thought!
If I wanted to power a 5hp saw I'd need a 7.5hp phase converter, correct? Converter just plugs into regular 220v outlet and machine plugs into converter?
I have a simple phase converter on my metal lathe for a 3hp 230v 3 phase motor. I wired it with two start caps and a potential relay as in the pic. There will be a loss of about 20% to 30% power this way- it hasn't affected my machine much at all @ 7.2 amps.
For full power (what you are probably talking about) you want to use a motor to phase it and yes, a 7.5 would be ideal for your 5 hp motor.
Like this;
http://www.temcoindustrialpower.com/prod...C0005.html http://www.phaseconverter.com/wiring_diagrams.html
Posts: 7,431
Threads: 0
Joined: May 2008
WaterlooMarc said:
I'm thinking about getting a phase converter so I can capitalize on all these old 3 phase machines selling for much cheaper than 1 phase. But I know absolutely nothing about them other than they're more expensive than I thought!
If I wanted to power a 5hp saw I'd need a 7.5hp phase converter, correct? Converter just plugs into regular 220v outlet and machine plugs into converter?
A VFD makes sense for 3hp and less, but gets expensive at 5hp and up ..
There are 4 ways .. Static, VFD, Rotary, Digital .. The latter 2 will work with a 3 phase distribution panel and can be used to power multiple machines.
Posts: 3,493
Threads: 0
Joined: Jun 2008
The easiest for me was to just call American Rotary and order a 20 hp rpc. It powers a widebelt and a big shaper and i can add more at any time. I cant really remember but i think mine cost around $1500...not really sure but i do know the price is long forgotten but the quality is remembered every day i walk over and turn it on.
Posts: 7,431
Threads: 0
Joined: May 2008
[blockquote]Jeremy s said:
That last comment says it all .. do it once .. do it right .
Posts: 1,730
Threads: 13
Joined: Jul 2001
Rick F said:
[blockquote]Jeremy s said:
That last comment says it all .. do it once .. do it right .
$1500 is a lotta $200 3HP Teco FM50 VFDs.
-Mark
If I had a signature, this wouldn't be it.
Posts: 4,895
Threads: 0
Joined: May 2010
MKepke said:
[blockquote]Rick F said:
[blockquote]Jeremy s said:
That last comment says it all .. do it once .. do it right .
$1500 is a lotta $200 3HP Teco FM50 VFDs.
-Mark
[/blockquote]
What if he wants to run a 5 hp tool
Posts: 3,493
Threads: 0
Joined: Jun 2008
MKepke said:
[blockquote]Rick F said:
[blockquote]Jeremy s said:
That last comment says it all .. do it once .. do it right .
$1500 is a lotta $200 3HP Teco FM50 VFDs.
-Mark
[/blockquote]
So you can power widebelt sanders and 8 hp shapers with vfds?
