Percussion Box Help
#3
I am making a small percussion block. It is @ 2" x 2" x 8". I have never made one before. This will be mounted on a Stomp Fiddle and will be struck with a drum stick. 

I have some parts already cut out and only need final fitting before glue up. I am using hard maple for the bottom and ends, QS sycamore for the sides and either Mulberry or Peruvian walnut for the strike surface. I will be cutting a slot for sound on one or both of the sides. The bottom and ends are 3/8" think while the remaining pieces are @ 1/4" thick. 

I can easily make the body out of one piece of maple or beech and hollow it out if that would be better.

Need some tips on making this percussion block.
Reply
#4
HTH


Worst thing they can do is cook ya and eat ya

GW
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.