Posts: 40,103
Threads: 0
Joined: Apr 2007
11-11-2016, 01:27 AM
(This post was last modified: 11-11-2016, 02:47 AM by Bob10.)
I am curious where to look for the top of this and an idea of what one might cost
Seems the pictures I found are encrypted
https://encrypted-tbn3.gstatic.com/image...ib863ucLpO
![[Image: lathe%20post_zpstdgd7fj4.jpg]](http://i166.photobucket.com/albums/u111/Bobluciano/lathe%20post_zpstdgd7fj4.jpg)
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 261
Threads: 0
Joined: Apr 2007
Location: Shenandoah Valley, Virginia
The tool rest is removed from the lathe and placed in it..
Any powermatic (or other brand) tool rest with a 1" shaft will work in it..
Very handy if you want to turn something over 12".
Some mistakes are too much fun to make only once.
Posts: 46
Threads: 0
Joined: Jan 2014
It is missing the offset tool rest holder that goes in the top. They aren't super common to find it will cost over $100 from what I have seen.
Posts: 261
Threads: 0
Joined: Apr 2007
Location: Shenandoah Valley, Virginia
Mine looks just like that one except it is painted gold...
As I said... I simply take the tool rest from the lathe and put it in it.. Works great...
Depending on what you are turning, you can put different shaped tool rests in it, but any one with a 1" shaft will work..
There are no other parts missing on it...
Some mistakes are too much fun to make only once.
Posts: 40,103
Threads: 0
Joined: Apr 2007
(11-11-2016, 07:17 AM)JDS30 Wrote: It is missing the offset tool rest holder that goes in the top. They aren't super common to find it will cost over $100 from what I have seen.
Yep that sounds like what I am looking for. I have seen the complete pedestal sell for $400 but I only have the post if I could find the top that would be great.
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 46
Threads: 0
Joined: Jan 2014
Pappy it can be used without it it just is easier with the offset rest holder here is a picture of one.
![[Image: image_zpsc3xeb3r1.jpeg]](http://i578.photobucket.com/albums/ss229/spence30_2009/Mobile%20Uploads/image_zpsc3xeb3r1.jpeg)
Posts: 40,103
Threads: 0
Joined: Apr 2007
11-11-2016, 04:36 PM
(This post was last modified: 11-11-2016, 05:00 PM by Bob10.)
The piece I need is this
![[Image: Untitled_zpszvywo6nx.jpg]](http://i166.photobucket.com/albums/u111/Bobluciano/Untitled_zpszvywo6nx.jpg)
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 261
Threads: 0
Joined: Apr 2007
Location: Shenandoah Valley, Virginia
Have you tried the OWWM forum ??
Sorry, the picture you showed had it on it.. did not know that is what you need.. never saw one without the main post..
Good luck..
JDS30.. Agree that makes it easier to use...
Some mistakes are too much fun to make only once.
Posts: 40,103
Threads: 0
Joined: Apr 2007
No worries I could not find pictures other than ebay and they seem all be encrypted Screen shot and paint helped out. I came across the post with a lathe that had been moved around a lot no idea how or why it was not there just thought I could find or worst case make one
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
![[Image: lathe%20post_zpstdgd7fj4.jpg]](http://s166.photobucket.com/user/Bobluciano/media/lathe%20post_zpstdgd7fj4.jpg.html)
![[Image: image_zpsc3xeb3r1.jpeg]](http://s578.photobucket.com/user/spence30_2009/media/Mobile%20Uploads/image_zpsc3xeb3r1.jpeg.html)
![[Image: Untitled_zpszvywo6nx.jpg]](http://s166.photobucket.com/user/Bobluciano/media/Untitled_zpszvywo6nx.jpg.html)