Posts: 6,291
Threads: 0
Joined: Jul 2005
Location: Knoxville
It depends on what you are considering the sharpener. Here is a photo of a complete PM 180 grinding assembly.
Clockwise from the top are the grinding bar, grinder motor/wheel/mount, indexing ring, jointer, and plunger mount. The motor/wheel/mount and jointer from a PM 100 will work on your 180. The bar, ring, and plunger will not.
Bill
Know, think, choose, do -- Ender's Shadow
Posts: 676
Threads: 2
Joined: Jan 2007
This one of the most confusing threads I've seen in a long time!
Posts: 39,550
Threads: 0
Joined: Apr 2007
not really the PM100 is a 12" machine so the bar is too short. The grinder OTOH fits all the machines of the period. So the only confusion arises is what does the OP consider the "sharpener"
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 24,326
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
Seems it's missing the grinder head so size, etc. is a moot point.
![[Image: 00h0h_gKWLhE8nnPY_600x450.jpg]](https://images.craigslist.org/00h0h_gKWLhE8nnPY_600x450.jpg)
![[Image: 00J0J_5Z96KrPZ5VP_600x450.jpg]](https://images.craigslist.org/00J0J_5Z96KrPZ5VP_600x450.jpg)
If anyone is interested here's the Craigslist link:
http://louisville.craigslist.org/tls/5896548609.html
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 6,291
Threads: 0
Joined: Jul 2005
Location: Knoxville
11-30-2016, 07:39 PM
(This post was last modified: 11-30-2016, 07:42 PM by skizzo.)
Since grinder motors fit all PM planer models, they're a lot more common/easier to find than model-specific grinder bars. Just sayin.
On the other hand, many folks would say that using a grinder bar on a 12" planer may be more trouble than it's worth compared to just swapping out knives for normal sharpening.
Bill
Know, think, choose, do -- Ender's Shadow
Posts: 39,550
Threads: 0
Joined: Apr 2007
Hey Bill since I found you here do you know where to find one of these?
![[Image: Untitled_zpszvywo6nx.jpg]](http://i166.photobucket.com/albums/u111/Bobluciano/Untitled_zpszvywo6nx.jpg)
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 6,291
Threads: 0
Joined: Jul 2005
Location: Knoxville
What's the make of that outboard stand... Oliver? PM? Best bet is typically ebay, if you don't find one at a school auction or something. Do you need the whole stand, or just the upper casting?
Bill
Know, think, choose, do -- Ender's Shadow
Posts: 39,550
Threads: 0
Joined: Apr 2007
it's PM and I just need the upper casting.
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 6,291
Threads: 0
Joined: Jul 2005
Location: Knoxville
ebay or OWWM.
Bill
Know, think, choose, do -- Ender's Shadow
![[Image: Untitled_zpszvywo6nx.jpg]](http://s166.photobucket.com/user/Bobluciano/media/Untitled_zpszvywo6nx.jpg.html)