Carbide turning tools.
#41
(04-12-2017, 11:07 PM)Gregory of Sherwood Forest Wrote: Any plans to do a parting tool? I love the others that I bought from you.

Glad that you like the tools.

Sorry I have no plans on making a parting tool, yet.

But I am working on making carbide tool for the full size Vega lathe Duplicator.
Reply
#42
Adding some mini turning tools and replacement inserts
The insert are interchangeable with EWT Ci2-Square and the C12 R2- 2" Radius.

Mini Sq Rougher insert 10.5mm x 10.5mm $5 each
Mini Rougher insert 11mm x 11mm x r2"/50mm $5 each


The Mini Rougher, Mini finisher and the Mini Detailer are made with 3/8 304 stainless steel.
They measure 6" long with a 2" tang.

Mini Rougher $21 plus shipping
Mini finisher $23plus shipping
Mini Detailer $27 plus shipping

Mini Rougher
[Image: 20170415_125614_zps7hwdrl3d.jpg]

[Image: 20170415_125618_zps5hf90fjh.jpg]

Mini Finisher using a 12mm insert
[Image: 20170415_125700_zpsgchz17qe.jpg]

[Image: 20170415_125705_zpsbely85nq.jpg]

Mini Diamond Detailer
[Image: 20170415_125636_zpsnyggewtj.jpg]

[Image: 20170415_125641_zpskvqkl5n7.jpg]
Reply
#43
John--thanks for the quick turn-around on getting my tools built. Got to tinker last night, world of improvement over what I've been doing!! Appreciate you doing carbide at my budget!! Side benefit for a novice like me is that it gives me a benchmark on how a sharp tool cuts...that will help in learning how to sharpen. Thanks again!!
earl
Reply
#44
Earl,
 glad you like the tools. If you need anything else let me know.
Reply
#45
Have some tools still available.
I can make them different lengths if needed.

John
Reply
#46
PM sent for Mini tools
Reply
#47
Just a quick note. Got my shipment today could not be more pleased. If you haven't looked these, I can safely say, they are well made and John couldn't be easier to work with.

Thanks again John.
Reply
#48
I wont be having any tool bars probably for a week or two. I broke a gear in my lathe and have to order one tomorrow.
Hopefully they have it in stock and can get it to me this week.

Trying to make a expandable mandrel and the carriage gear broke while doing the Knurling.
Reply
#49
Back up and running again. If you need any thing let me know.


New part arrived today but with issues.

Packaged had the right part number on label but wrong part in package.
I was able to modify the broken one and get it to work again till i get it straighten out with the supplier.
Reply
#50
Are you still making these?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.