Woodnet Forums › › Active › Finishing v
Glue/Finishing
Thread Modes
Glue/Finishing
Gibbcutter Offline
Member
Posts: 343
Threads: 88
Joined: Feb 2005
#4
02-02-2017, 04:37 PM
Some glue impacted the degree of stain absorption. Sanding out is not an option.
Any tricks out there that could help?
Find
Reply
cputnam Offline
multi-slacker
Posts: 6,674
Threads: 1
Joined: Jan 2003
Location: Southern California
#5
02-02-2017, 04:51 PM
Scrape or chisel out? Cover up with a glaze? Cover with tinted shellac?
Thanks,  Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
      -- Soren Kierkegaard
Find
Reply
Rob Young Offline
Helper Monkey
Posts: 4,133
Threads: 0
Joined: Oct 2009
Location: Lawrence, KS
#6
02-02-2017, 05:32 PM
(02-02-2017, 04:37 PM)Gibbcutter Wrote: Some glue impacted the degree of stain absorption.  Sanding out is not an option.
Any tricks out there that could help?

Careful in-painting of color in the affected area after sealing things down with some blonde shellac.  Then seal down the in-painting.  Then move on with the rest of the finishing schedule.

Alternatively, seal everything down and then go with a darker color in a gel-stain formulation, leaving it to nearly dry on the affected area.  That makes it darker and may mask the boo-boo.  Seal again and continue with finishing schedule.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Find
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.