Worm drive saw dust collection
#11
Just bought a Ridgid worm drive saw for the shop to see if it cuts better than a regular circular saw.

We are cutting 4 sheets of 7/16 OSB at a time, right on the stack. With the other saw, someone holds a vacuum hose near the sawdust port and it gets a decent amount Of saw dust.
But with this worm drive there is no dust port.

Why not?
Reply
#12
Just guessing, but that saw is (I think) considered a job site saw that contractors use for construction. I would bet there's little call for a dust port in that service. Like I said, I'm just guessing.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Reply
#13
I agree with Fred as a construction site saw no one cares about the sawdust.  

I use my '77 in both the field and the shop and never even considered DC as an option 

Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future  John F. Kennedy 



Reply
#14
Here's an expensive solution. Looks like it would be fairly easy to make one.

https://www.dustmuzzle.com/dust_collecti...rglass.php
Reply
#15
Jobsite conditions are what I figured too. But when you are slicing 4 sheets at a time and the wind is blowing it everywhere (but mostly directly into your face) it is a problem.

The Dust Muzzle is interesting but not $80 interesting. I'd like to challenge the "95%" claim as we HAVE been making and modifying a collector and I'd estimate 30-40% of the sawdust makes it around and exits at the back.

We will keep on trying to make something acceptable.

Thank to all!
Reply
#16
(02-12-2017, 08:45 PM)mission17 Wrote: Jobsite conditions are what I figured too. But when you are slicing 4 sheets at a time and the wind is blowing it everywhere (but mostly directly into your face) it is a problem.

 The Dust Muzzle is interesting but not $80 interesting. I'd like to challenge the "95%" claim as we HAVE been making and modifying a collector and I'd estimate 30-40% of the sawdust  makes it around and exits at the back.

 We will keep on trying to make something acceptable.

Thank to all!

That's why you set up your bench so the wind blows the dust away from you! BTDT


Al
I turn, therefore I am!
Reply
#17
A solution that may work for you.

https://www.youtube.com/watch?v=Zys1IFASrik

The adapter is sold by Bosch and available on Amazon. Here is a link.

https://www.amazon.com/Bosch-CSDCHUTE-Du...B000WA9586

As stated in the video you may have to modify the shape of the adapter but it is easily done with a heat gun.

Bill
Reply
#18
That's why you set up your bench so the wind blows the dust away from you! BTDT


  The "bench" is 68 sheets of OSB. So set up is where the delivery driver sets it. And wind is pretty unpredictable. It never seems to blow AWAY from you.

  The fact that the sawdust can't escape the kerf except by going UP exacerbates the problem.
Reply
#19
(02-12-2017, 08:45 PM)mission17 Wrote: The Dust Muzzle is interesting but not $80 interesting. 

We will keep on trying to make something acceptable.

Here's a DIY Dust Muzzle. Scroll down to "Dust Extraction" near the end.

https://www.danpattison.com/blog/2016/10...rcular-saw
Reply
#20
About all the dust collection I have ever seen with a worm saw looks like



[Image: 0aedca44-0575-4abd-a6f4-58623cb7ae18_300.jpg]
Worst thing they can do is cook ya and eat ya

GW
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.