Table top finished
#7
So here are pictures of the finished table top. I still need to paint the base. I was thinking of staying with a brown color.

[Image: Table%20top2.jpg]

[Image: Table.jpg]
Reply
#8
That top is beautiful.  It looks like you mastered the EnduroVar in the end. 

John
Reply
#9
I would say you did just fine. 

That is very intricate work and you nailed it.

Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future  John F. Kennedy 



Reply
#10
The sides are still rough. I need to call General Finishes this week and see if I can get new material.
Reply
#11
If you have good coverage and it's just rough from over spray, etc., then take some 1500 grit sand paper and buff it smooth by hand.  Or get some Micro Mesh pads.  If the sheen is off, go higher or lower on the grit.  

John
Reply
#12
I will give that a try. I was worried about the changing the sheen. If I do mess it up I can always shoot another coat.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.