Posts: 1,934
Threads: 0
Joined: Feb 2008
So, in the trades when I ask for a Sawzall I get a reciprocating saw. When I ask for a Skil-saw I get a portable circular saw (hopefully not the "Skil" brand), and it's usually a sidewinder. So now I'm searching for a 10" or 12" portable circular saw and for the life of me I cannot get results that do not include circular saw blades!
Also if anyone has any suggestions, they are appreciated. I hope to spend around $300 or less considering limited amount of use and possible abuse during construction demo. I have a half dozen or more Makita 5007's in varying condition from only good for demo to new in the box, 7-1/4 blades good enough for demo are cheap so the 10" or 12" will only be used when additional depth of cut is needed.
Sign at N.E. Vocational School Cabinetmaking Shop 1976, "Free knowledge given daily... Bring your own container"
Posts: 65
Threads: 0
Joined: Feb 2013
Location: Portland, ME
Posts: 388
Threads: 0
Joined: Apr 2012
Those deep cut saws are for timber. 15amps isn't much with that much cut. You have to baby them. Mafel is another brand.
A man of foolish pursuits
Posts: 10,771
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
Skilsaw makes the "Sawsquatch" 10" wormdrive & Milwaukee has a 10" sidewinder.
I've got the Milwaukee......darn right you only use it when needed.
Ed
Posts: 2,497
Threads: 0
Joined: Oct 2005
There is always this option
![[Image: pix-beamcutter5.jpg]](http://praziusa.com/images/pix-beamcutter5.jpg)
"There is no such thing as stupid questions, just stupid people"
Posts: 1,622
Threads: 0
Joined: Mar 2008
03-02-2017, 01:57 AM
(This post was last modified: 03-02-2017, 03:35 AM by Lynden.)
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
03-02-2017, 02:09 AM
(This post was last modified: 03-02-2017, 02:13 AM by Steve N.)
Having done it both ways. I know the Makita is a huge PIA to carry around, but on a shoe they glide so nice. To be truthful the Prazi scared the beejeeebers out of me. I think the owner of the one I saw at a HfH build was a Mo-ron, he had it kick back 3 times trying to show us 1 cut. The vote was universal among several long time contractors that we were using the Makita for any big cutting. I have never used the Mafell but below you can see it's a Prazi with all the parts, most of them being safety features. I understand they cost a penny or 5.
Worst thing they can do is cook ya and eat ya
GW
Posts: 1,919
Threads: 0
Joined: Jul 2007
Location: Central Indiana - Kokomo Area
I would hate to have ANY of these big saws kickback!!!
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
My history with the Makita is it's just like any circular saw. If you can't keep going in a straight line, you will start to bind, and it will kick back. If you can saw straight it's just lifting more weight. If the wood isn't really flat is when the shoe like in the video for the Makita really makes it much calmer to use. Going across rough or uneven surface is the beginning of sawing off course for many. On the sled it just floats right over the cut, because the saw base, and the sled are both smooth. The Prazi, still scared me, possibly if I had seen it used by someone more capable with it. Haven't used the Mafell, but I know people who have, and I respect their abilities, and all of them rave about them.
Worst thing they can do is cook ya and eat ya
GW
Posts: 1,934
Threads: 0
Joined: Feb 2008
Thanks for all the info. guys! I'm considering the Skil worm drive, 10" version. I know what I said about skilsaws but I have used their 7 1/4" version and it seemed to have plenty of power. The poor tool has spent most of it's life cutting reliefs in concrete slabs.
Recently I spent a few weeks ripping and notching with the Makita 16". My only problem with that was controlling the gyroscope effect while cutting 1/2" wide x 3" deep notches in ganged up 2 x 8"s every 6"!
I've also tried the Prazi, and also felt that something could go seriously wrong in an instant. I only made a half dozen or so cuts before I decided it was not worth the chance. I'd rather just use a chainsaw freehand, it feels more natural.
I agree that with any circular saw, getting the first inch or so headed in the desired direction is the most important part of the cut for safety and accuracy. It's been my experience that cutting a straight line with a thin kerf becomes progressively more challenging with each nail you cut through. (my favorite is the Makita 7 1/4 full kerf, The carbide may chip away but rarely does it throw a tip.)
And to Lynden; What did you search for? And b.t.w. the lower priced Makita beam saws are already gone.
Again, Thank-you all for your input.
Sign at N.E. Vocational School Cabinetmaking Shop 1976, "Free knowledge given daily... Bring your own container"
